[eliaselias]

Pls I need info on how to use digiprog 3 to correct ford explore 2004 truck (pickup)

i have try to do this dash with digiprog 3
it have MC9S12DP256 mcu inside
digiprog read it well.. i have read it in eeprom page
but when i want to write the new mileage... nothing change
maybe you need to lift some pin ... i did not try to lift them
good luck

[Acvigs]

Pls I need info on how to use digiprog 3 to correct ford explore 2004 truck (pickup)

I've tried digi3 with a 04 and 05 explorer, the 04 shift column was destroyed because the spring on the shift needle came loose, the 05 has a eeprom but i couldn't figure out which Ford model to choose in order to correct.

[fajemibola]

I am talking. Of the pickup/ truck model that does not have the 8pin chips

[Clusters]

An Explorer is not a pickup truck, so which do you have?

Post pictures of the back of the circuit board.

Next time, please start your own thread instead of hijacking an old one and supply ALL the relevant info. Year, make, model, and pictures always help. Ford used many different clusters in that year range from different models.

And if it is a HC11 processor, forget using Digiprog clone on it.