[spider80]

Redownload file. Change version of ISTA-D to 3.56.21, RU base to 3.56.14, new firmware for ICOM A1/A2.

[winter]

Thanks, all working fine over here.

Ok glad to hear. Thing is I can no longer connect to the car. Even with E-SYS I can't anymore.

5 modules failed. KOMBI, HU_MID etc...Car does not even start anymore.
Autologic has been able to connect and so 5 units needs updating, doing it right now, hopefully it will take me out of this mess.

If you programming a car by direct connection mode,modules in the MOST network can't be programming.so fix it you can connect a router between ICOM and laptop,and try again.

[DJ_B4L]

Hi guys can some one seed im stuck on around 97% on torrent and its downloading at 5-6 kbs which will take 4 days thanks

[Peter605]

Thanks, all working fine over here.

[DJ_B4L]

Hi guys i got ista d working cant get ista p to load

When i open the loader it brings a icon to the bottom right of window nothing more as you move the move over it disappears

Any ideas

Also my files seem to show blocked even if i unblock them and apply when i look again they go back to blocked can this be the issue if so what other way id there to unblock these

I used the network tool after reboot the network item was called usb already and was disabled and had the correct settings in tcp/ip 4 so there was nothing to edit

Then I copied the first ista p folder then copied the newer files over it and then tried the launcher but it doesnt go any further

[energjia]

Hello,

i did ICOM update successfully with those files but when i try ISTA-P 3.59.0.600 got this attached,


any idea if there are newer files to update ICOM A1 or A2 that will work with ISTA-P 3.59.0.600 or any trick ?

[spider80]

Hello,

i did ICOM update successfully with those files but when i try ISTA-P 3.59.0.600 got this attached,


any idea if there are newer files to update ICOM A1 or A2 that will work with ISTA-P 3.59.0.600 or any trick ?

For me all work excellent and ISTA-D and ISTA-P. Try reflash or flash a previous version and try again.

---

Hi guys i got ista d working cant get ista p to load

When i open the loader it brings a icon to the bottom right of window nothing more as you move the move over it disappears

Any ideas

Also my files seem to show blocked even if i unblock them and apply when i look again they go back to blocked can this be the issue if so what other way id there to unblock these

I used the network tool after reboot the network item was called usb already and was disabled and had the correct settings in tcp/ip 4 so there was nothing to edit

Then I copied the first ista p folder then copied the newer files over it and then tried the launcher but it doesnt go any further

Use to unpack 7-zip 16.02.

[DJ_B4L]

I used winrar over 5.3.1 what was recommended in the thread

Shall i try 7 zip

---

Strange how ista D opens but not ista P

I used winrar to extract that too

How can i unblock these files that were not archived

[spider80]

I used winrar over 5.3.1 what was recommended in the thread

Shall i try 7 zip

---

Strange how ista D opens but not ista P

I used winrar to extract that too

How can i unblock these files that were not archived

Forget winrar, use 7-zip.

[DJ_B4L]

Ok il try that later tonight