[sollaris]

Hello guys.
I have a bmw e46 1999.
I am trying to diagnose my car,but i failed untill now.
I installed ISTA-D....but it seems it doesnt read my ECU.
PErhaps it is not compatible with my car.
Will ISTA-P help?
Thank you all.
Have a nice day.

EDIT Post 06.07.2016

I downloaded both ista-d and ista-p from this post:
http://cartechnology.co.uk/showthread.php?tid=15589

I have use this tipps at instalation:

"""
Rheingold :
Unpack, for examle in D:\Rheingold, unpack and copy SQLiteDBs in Rheingold\SQLiteDBs\, run RCleanerV4.3.exe from Tools folder.
Apply ISTA-D Reg Fix for your system (x86 or x64) from Tools folder.
Run D:\Rheingold\TesterGUI\bin\Release\ISTAGUI.exe.
If ask license, enter it from License.txt file. Enter 1 in ISIS field, ignore error and press ok.
"""

What i did extra:

In Device manager...i changed the port to 9...latency 1..
In the Ediabas.ini....I opened with Notepad...and made some adjustments..as port..interface...etc.

I do not get any errors...but i get this screen:



In the pas i used 1 month INPA 5.02....but it was in german..
The language destroyed my success with the diagnose program.

Can anybody help me out to set up ISTA-D please?
Thank you for your support.

[Bimmer540]

Which cable/cabels you use? Is this the first time you used Ista-d?

[Fx82]

You should use the odb plug under the hood.

[sollaris]

Which cable/cabels you use? Is this the first time you used Ista-d?

Hello buddy.
I use K-Dcan cable.
I found this forum 1 week ago....so Yes..this is my first time with ISTA-D.
Thank you for the reply.

---

You should use the odb plug under the hood.

Hello buddy.
My car has only the 20 pin connector under the hood.
Inside the car i have nothing.

---

Ista D is for diagnosis
Ista P is for programming

For E series, you just need a K+DCAN usb cable

Ok mate..i understand.
Then if ISTA-D works for you guys...it should work for me also..
Just need a litle help with the settings.

[Bimmer540]

Wich K+Dcan you use and incl 20 pins cable? Can you make a picture of it.

[sollaris]

Wich K+Dcan you use and incl 20 pins cable? Can you make a picture of it.

Hello buddy.
Here is the picture.
The cable came with my INPA purchase.


Thank you very much.

[Bimmer540]

Okay. K+DCAN can not read k-line so you need this cable:

Ista-d VCI config: ediabas


Setup com-port correctly.

right driver for interface installed? "from supplied CD?"

---

Ore you modified the cable.

[sollaris]

Okay. K+DCAN can not read k-line so you need this cable:

Ista-d VCI config: ediabas


Setup com-port correctly.

right driver for interface installed? "from supplied CD?"

Hello mate.
That cable i can not buy..because i have no slot inside my car for it.
I only got the 20 pins under the hood.


I belive i have found 2 problems..Please corrrect me if i am wrong.

1.
I can not edit OBD.ini to set the COMP port to 9
Because i don't have a OBD.ini file

2.
In Ediabas.INI the TCP remote host is LMUC203404
Is that correct?

Here is my EDIABAS config file..after i edited it:

;#################
;# EDIABAS 7.3.0 #
;#################

;=============================================================================
[Configuration]
;=============================================================================
Interface = STD:OBD
Simulation = 0

EcuPath = C:\EDIABAS\ECU
SimulationPath = C:\EDIABAS\SIM
TracePath = C:\Windows\Temp
TraceSize = 1024

ApiTrace = 0
IfhTrace = 0
; IfhnTrace = 0

; SystemTraceSys = 0
; SystemTraceBip = 0
; SystemTraceIfh = 0
; SystemTraceNet = 0

; BipDebugLevel = 0
; BipErrorLevel = 0

UbattHandling = 0
IgnitionHandling = 0
ClampHandling = 0

RetryComm = 1
SystemResults = 1
TaskPriority = 0

; CodeMapping = C:\EDIABAS\BIN\ansi2oem.tab
; LoadWin32 = 0

NetworkProtocol = TCP

; --- neu ab EDIABAS 7.2.0 ---------------------------------------------------
ShowIcon = 0
LogLevel = 0
TraceBuffering = 0
TraceHistory = 999
TraceSync = 1
; TraceWriter = <FilePathName>

;=============================================================================
[TCP]
;=============================================================================
RemoteHost = LMUC203404
Port = 6801
TimeoutConnect = 2000
TimeoutReceive = 2000
TimeoutFunction = 10000
; TimeResponsePending = 5000
; DisconnectOnApiEnd = 1
; InitCmd0 = FE,04,00,03,01
; InitCmd1 = FD,05,00,03,01

;=============================================================================
[XEthernet]
;=============================================================================
RemoteHost = Autodetect
HeaderFormat = 0
TesterAddress = F4,F5
ControlPort = 6811
DiagnosticPort = 6801
TimeoutConnect = 20000

;=============================================================================
[IfhProxy]
;=============================================================================
Port = 6700

;=============================================================================
; End Of File EDIABAS.ini
;=============================================================================

Thank you very much.

[Bimmer540]

You must use that cable between 20 pin and K+DCan.

[beemered]

You need the OBD.ini and you need to connect pin 7 + 8 in the K+DCAN