Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Ista D vs ISTA P
06-07-2016, 13:49 PM, (This post was last modified: 06-07-2016, 13:59 PM by sollaris.)
Post: #11
XZBMW  RE: Ista D vs ISTA P
(06-07-2016, 10:19 AM)snypertje Wrote:  You must use that cable between 20 pin and K+DCan.

Ok buddy..
I bought that adaptor from ebay as you said,to bridge pin 7 and 8.
It will come next week.
See you than.

(06-07-2016, 11:06 AM)beemered Wrote:  You need the OBD.ini and you need to connect pin 7 + 8 in the K+DCAN

I ordered the adaptor cable....
Do you please have a OBD.ini file...?
So i can have all the puzzle pieces until the cable arrives?
Thank you.
Quote this message in a reply
06-07-2016, 14:11 PM, (This post was last modified: 06-07-2016, 14:13 PM by Bimmer540.)
Post: #12
XZBMW  RE: Ista D vs ISTA P
(06-07-2016, 13:49 PM)sollaris Wrote:  
(06-07-2016, 10:19 AM)snypertje Wrote:  You must use that cable between 20 pin and K+DCan.

Ok buddy..
I bought that adaptor from ebay as you said,to bridge pin 7 and 8.
It will come next week.
See you than.

(06-07-2016, 11:06 AM)beemered Wrote:  You need the OBD.ini and you need to connect pin 7 + 8 in the K+DCAN

I ordered the adaptor cable....
Do you please have a OBD.ini file...?
So i can have all the puzzle pieces until the cable arrives?
Thank you.

Ista-d VCI config: ediabas!!!!


Attached Files
OBD-INI.txt
File Type: .txt
Downloaded: 14 times
Size: 79 bytes

Quote this message in a reply
06-07-2016, 14:14 PM,
Post: #13
RE: Ista D vs ISTA P
Install Ediabas from your download. ODB.ini is in there.
Open K+DCAN cable and solder 7+8 together (then you do not need the adapter)
Quote this message in a reply
06-07-2016, 15:11 PM,
Post: #14
RE: Ista D vs ISTA P
Indeed Ediabas is required!!!
Quote this message in a reply
06-07-2016, 19:11 PM,
Post: #15
RE: Ista D vs ISTA P
(06-07-2016, 14:14 PM)beemered Wrote:  Install Ediabas from your download. ODB.ini is in there.
Open K+DCAN cable and solder 7+8 together (then you do not need the adapter)

For full scan - 100% need adapter with 17 and 20 pin soldered.
For engine 16pin OBD under dash is enough.
BTW is better to use DIS V57 for E46.
Quote this message in a reply
15-07-2016, 11:46 AM,
Post: #16
XZBMW  RE: Ista D vs ISTA P
(06-07-2016, 13:49 PM)sollaris Wrote:  
(06-07-2016, 10:19 AM)snypertje Wrote:  You must use that cable between 20 pin and K+DCan.

Ok buddy..
I bought that adaptor from ebay as you said,to bridge pin 7 and 8.
It will come next week.
See you than.

(06-07-2016, 11:06 AM)beemered Wrote:  You need the OBD.ini and you need to connect pin 7 + 8 in the K+DCAN

I ordered the adaptor cable....
Do you please have a OBD.ini file...?
So i can have all the puzzle pieces until the cable arrives?
Thank you.

succeeded?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,649 627,780 43 minutes ago
Last Post: JPToadstool
  ista 4.46 Standalone kiranabc 33 3,059 11 hours ago
Last Post: Siki78
  ista for use whit vcx se db8000 0 41 Yesterday, 15:28 PM
Last Post: db8000
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 363 Yesterday, 10:39 AM
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,364 27-03-2024, 20:02 PM
Last Post: Node
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,480 27-03-2024, 10:39 AM
Last Post: MINIGP1610
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 127 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 167 26-03-2024, 05:11 AM
Last Post: 2013m5
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 669 25-03-2024, 08:11 AM
Last Post: Node
XZBMW Ultimate Ediabas/ISTA+ voltage control V3 Node 322 121,512 24-03-2024, 23:45 PM
Last Post: armenh7

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content