[840i]

Hi guys,

Integration level through ISTA/P v59 failed half way, 6 modules kaput, KOMBI etc.
Managed to recover KOMBI, but CICMID, 2009 CICMID headunit, did not work with E-SYS.
FAN spinning full speed.

E-SYS was complaining about Not in the right state and Ethernet. That was in the car, I took it out of the car to flash on bench, same issue.

A buddy of mine tried to flash using UDS I believe instead of Ethernet, it failed after 3h, E-SYS tried 3 times.

Radio was working fine before that.

Any assistance would be greatly appreciated.

[bmw335coding]

Try with ICOM or ENET?

[dj-um]

Try to post some screens man... thants gonna be informative

[840i]

Try with ICOM or ENET?

Did use genuine ICOM initially then I recovered Kombi with ENET

---

Try to post some screens man... thants gonna be informative

Got the module flashed tonight but it seems the Ethernet interface is faulty on this unit.
I checked the pins all good.
So the unit got flashed over CAN Bus and this time it seems it went through. No more warning on the ECU itself, but it makes a small noise every 2 sec now, like CD noise.

I have no screen right now, so I can not test

Here are the errors I got tonight.

HU_CICMID - 63 finalizeECUFlash finished ibaDeploy (ibad_00000a1f-008_015_021) TA finished RC_CPPC MCDDiagService<id=38000, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=RC_CPPC, description=ECU signaled that any ProgrammingPreCondition not fullfilled, but no further details provided from ECU!, link=HU_CICMID_63_ETHERNET>

[HU_CICMID - 63 - ibad_00000a1f-008_015_021] Transaction type: ibaDeploy; Message: 99% progress on ECUId:HU_CICMID_0x63 [99% of ibad_00000a1f-008_015_021]
[HU_CICMID - 63 - ibad_00000a1f-008_015_021] Transaction type: ibaDeploy; Message: 100% progress on ECUId:HU_CICMID_0x63 [100% of ibad_00000a1f-008_015_021]
[HU_CICMID - 63 - ibad_00000a1f-008_015_021] Transaction type: ibaDeploy; Message: 100% progress on ECUId:HU_CICMID_0x63 [100% of ibad_00000a1f-008_015_021]
[HU_CICMID - 63 - ibad_00000a1f-008_015_021] Transaction type: ibaDeploy; Message: TA finished
[HU_CICMID - 63] finalizeECUFlash started
[HU_CICMID - 63] finalizeECUFlash finished
[] finalizeVehicleFlash started
[] finalizeVehicleFlash finished
[] prepareVehicleForCoding started
[] prepareVehicleForCoding finished
MCDDiagService<id=46900, job=com.bmw.psdz.jobs.programming.zgw.MCD3_GetSVKfromECU, service=RDBI_SVK - ReadDataByIdentifier SVK, description=error: timeout, link=Physical request to ECU with address 0x63>
MCDDiagService<id=46900, job=com.bmw.psdz.jobs.programming.zgw.MCD3_GetSVKfromECU, service=RDBI_SVK - ReadDataByIdentifier SVK, description=error: timeout, link=Physical request to ECU with address 0x63>
MCDDiagService<id=46900, job=com.bmw.psdz.jobs.programming.zgw.MCD3_GetSVKfromECU, service=RDBI_SVK - ReadDataByIdentifier SVK, description=error: timeout, link=Physical request to ECU with address 0x63>
[HU_CICMID - 63] There was an error during TAL execution, please check the log files.
[HU_CICMID - 63] - [Exception - HU_CICMID - 63] negative response error:
code: TIMEOUT P2/T2 occurred
description: P2 timeout on Service RDBI_SVK has error in result: [Severity=2051][ErrorCode=58640][ErrorCodeDescription=resource not available][VendorCode=2142][VendorCodeDescription=P2 timeout occured]; ECU: HU_CICMID_63_ETHERNET
severity: ERROR

[] finalizeVehicleCoding started
[] finalizeVehicleCoding finished
[] finalizeTALExecution started
[] finalizeTALExecution finished
TAL execution finished
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "2h 44min 5s". [C206]


I have no screen but I am now able to code FDL the unit, which is a good sign. Will connect it back to the car in the morning, so fingers crossed it worked.