[willisodhiambo]

I retried ISTAP will all my connections on an F chassis. All connect except with K+DCAN, Technoical initialization error. I noticed that everything you try a connection, if you do not reboot, ISTAP is likely to get jittery with each successive attempt. Ill retry ISTAP again today with KDCAN on F series as the trial yesterday was done without rebooting after an attempt with ENET cable.

This is the only scenario remaining for me as far as ICOM, ENET and KDCAN is concerned on the F with ISTA+, ISTAP, ESYS and INPA. It was a pleasant surprise to see INPA can connect to F via KDCAN!

---

I retried ISTAP with all my connections on an F chassis. All connect except with K+DCAN, Technical initialization error. I noticed that every time you try a connection, if you do not reboot, ISTAP is likely to get jittery with each successive attempt. Ill retry ISTAP again today with KDCAN on F series as the trial yesterday was done without rebooting after an attempt with ENET cable.

This is the only scenario remaining for me as far as ICOM, ENET and KDCAN is concerned on the F with ISTA+, ISTAP, ESYS and INPA. It was a pleasant surprise to see INPA can connect to F via KDCAN!


Attempts on E series with KDCAN are all smooth for me but never tried ISTAP with KDCAN on E series. I use an ICOM for that.