Please Make Sure You Read The Forum Rules! , Thanks for registering We are glad you have chosen to be a part of our community :) Please do not use email addresses, website URLs, Skype info, or any other contact info as your Username.
  1. ObdToolUsa

  2. Martech

  3. obdresource

    obdresource.com
  4. Piwis tester II

  5. OBD Center

  6. ChiPTuninG



Post Reply 
Bmw F10 ZGW flash
25-07-2016, 04:09 AM
Post: #1
XZBMW Bmw F10 ZGW flash
Hi guys!
I need to flash ZGW due some issues.
Is it ok to flash ONLY ZGW to the latest I-step and leave the rest of the modules to the shipment I -step (car never had a software update)?
Thanks!
Find all posts by this user
Quote this message in a reply
25-07-2016, 10:53 AM
Post: #2
RE: Bmw F10 ZGW flash
It's not preferable but yes you can do that.

If my post helped you hit the thanks and reputation button
Find all posts by this user
Quote this message in a reply
 Thanks given by: lagunasec
26-07-2016, 07:14 AM
Post: #3
RE: Bmw F10 ZGW flash
You can refer tips in the attachment

ICOM A2 will be better for ZGW flash


Attached File(s)
Bmw ZGW flash [tips].txt
File Type: .txt
Downloaded: 118 times
Size: 88 bytes

Find all posts by this user
Quote this message in a reply
 Thanks given by: lagunasec
26-07-2016, 07:44 AM
Post: #4
RE: Bmw F10 ZGW flash
Thanks guys for your inputs!
Eventually I did it with esys and enet over gateway connection.
Everything is ok.
Find all posts by this user
Quote this message in a reply
24-10-2016, 12:10 PM
Post: #5
RE: Bmw F10 ZGW flash
Some ZGW's are more problematic to flash over ENET than others, FYI, here's my verified procedure for flashing ZGW with ENET which works for at least my 09/11 ZGW.

1. Assign 192.168.0.1 as static IP to the laptop's NIC
2. Run tftpd DHCP's server. In settings: pool starts at 192.168.0.2, pool size 1, default gw 192.168.0.1, subnet mask 255.255.0.0. Do NOT close tftpd
3. Connect laptop with ENET <-> OBD2 cable
4. Make sure that the car gets 192.168.0.2 as assigned IP <- this allows swDeploy to finalise OK.
5. Start e-sys, connect via GW use 192.168.0.2:6801 as connection traget, select correct series
6. TAL processing - select the already calculated TAL and SVT target, in ECUs unselect everything except for swDeploy for ZGW
7. Go to parameters uncheck activate programming mode setting <- this allows post-flash ops to complete OK
8. Check software compatibility, press start
9. Remember to check activate programming mode for then next flash
Find all posts by this user
Quote this message in a reply
24-10-2016, 17:21 PM
Post: #6
RE: Bmw F10 ZGW flash
I programed several ZGW and ZGW2 with ENET and normal TAL calculation and never had any problem.
Find all posts by this user
Quote this message in a reply
24-10-2016, 20:06 PM
Post: #7
XZBMW RE: Bmw F10 ZGW flash
I have tested whit error i dont can update zgw
I have error
Abortedbyerror (C207)
Find all posts by this user
Quote this message in a reply
24-10-2016, 20:21 PM
Post: #8
RE: Bmw F10 ZGW flash
As I was saying it depends on the HW-ID of the ZGW - there are probably 10-15 versions some flash via ENET without problems, others are impossible without ICOM A2. This is what worked for me (i-step 09/11).
Find all posts by this user
Quote this message in a reply
06-01-2017, 22:05 PM (This post was last modified: 06-01-2017 22:06 PM by warhol99.)
Post: #9
RE: Bmw F10 ZGW flash
HI help, please...

I try flash ZGW via ICOM with ISTA P...bootloader done ,but then show some error ....now car is dead, ISTA ask me vehicle order


so i try flash ZGW via ENET and ICOM with esys ...same error....TAL,SVT calculated, FA loaded, unchecked switch ecu....connected via GW X.X.X.X:6801 (ENET)

i use dhcp server, esys 3.27.1
   
Find all posts by this user
Quote this message in a reply
06-01-2017, 22:46 PM
Post: #10
RE: Bmw F10 ZGW flash
Not all ZGW01 before 0911 gave problems to update firmware with ENET or change settings, I think High version (more channel flexray) no problems, basis version problems
Find all posts by this user
Quote this message in a reply
Post Reply 


Bookmarks

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
XZBMW Flash zgw whit esys in pica14 13 866 10-01-2017 13:46 PM
Last Post: warhol99
  Need help - BMW FRM 3 flash dump file in pisicuta cabrio 0 875 27-02-2016 13:44 PM
Last Post: pisicuta cabrio
XZBMW 【Unsolved】 BMW E61 Active Sterring Fault - 6131 Flash operation or error NEC in Kamcio 6 899 28-01-2016 10:34 AM
Last Post: masa52
  116d flash to 118d with WINKFP? in CarT01 0 321 30-12-2015 18:54 PM
Last Post: CarT01
XSMini MINI R50 One 90bhp WINKFP Flash to 115bhp Cooper in CarT01 0 297 29-09-2015 04:54 AM
Last Post: CarT01
XZBMW WINKFPT 5.3.1 flash DSC (EHBX60) Module Video Tutorial in Yah 0 526 25-09-2015 00:28 AM
Last Post: Yah
  Flash E70 CI63F1 with wrong ZB No. in yushow5069 3 587 07-09-2015 06:36 AM
Last Post: zhoulihai13

Forum Jump:


User(s) browsing this thread:
warhol99, 1 Guest(s)

Return to TopReturn to Content