[Vojno]

Hello friends,
Can somebody help me, how can i setting the display size to Rheingold or ISTA+?

The problem is only in SSP!

I attached one example:

[SCOTT]

DID YOU CLICKED THE GREY BAR NEXT TO WHERE IT SAYS ISTA+ TO MAKE IT FULL SCREEN

[inspi1981]

It's normal size

[Vojno]

DID YOU CLICKED THE GREY BAR NEXT TO WHERE IT SAYS ISTA+ TO MAKE IT FULL SCREEN

Yes of course!

It's the full screen!
If I watch the error list then ok!

The problem is only if I look the wiring diagram (SSP).

[HestonDiag]

Upload your ISTAGUI.EXE file somewhere and provide a link to this.

Let me know which resolution you are running, and I will modify your file so hopefully it will automatically load full screen without needing to double click the grey bar at the top.

(N.b. normally resolution is expressed as number of horizontal pixels x number of vertical pixels e.g. 1600x900. I can make the horizontal value to a 4 digit value (e.g 1000-9999), but I can only modify the vertical value to a 3 digit number (e.g. 100-999). Also I've found this method seems to work nicely on most versions of ISTA, but I remember an older version (approx. 18 months ago) which would not properly fill the page like in your screenshot

[Almaretto]

You can always print to PDF and then zoom in on Picture.

EDIT: Nevermind. I see problem now after searching SSP.

[Vojno]

Upload your ISTAGUI.EXE file somewhere and provide a link to this.

Let me know which resolution you are running, and I will modify your file so hopefully it will automatically load full screen without needing to double click the grey bar at the top.

My screen resolution 1680x1050, as you can see on the attached picture, and I attached the ISTAGUI!

Thanks!

[HestonDiag]

Sorry can you please provide me your ISTAGUI.EXE instead of ISTAGUI.EXE.CONFIG

[Craigmccly22]

Ista is its own screen. So it will only size to the ista screen size not the computer screen

Sent from my SM-G903F using Tapatalk

[clevo]

I hope this helps you further