Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Passat B6 EDC17CP14 cloning
05-08-2016, 13:38 PM,
Post: #11
|
|||
|
|||
RE: Passat B6 EDC17CP14 cloning
(03-08-2016, 20:35 PM)Griff Wrote: Starter turns, in ECU no DTC cars will not start. I am write my Mod_Flash and you eeprom. DTC (B2000-control module deffect)only in dashboard. Read VIN in Dash (OdIS) vin-xxxxxxxxxxxxxxxxx. This damp dashboard 24c32 Griff mate things are getting really confusing at this end. It seems that you now have a problem with the a damp dashboard ? Ok, best thing to do to see if your ecu is damaged or not, write my immo off eeprom and then try to start car. If your ecu is good it should start ok. All VAG immo off or transfer - change Power Class up to & including WFS6 SHE -VAG DCM 6.2 3.7 - immo off also Bcm2, Elv, TC DSG DL381 DQ200 DQ250 DQ400 DQ500: Here:
AKL MQB - + A6-A7-A8-Touareg- generate sync key file - Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need. |
|||
05-08-2016, 18:36 PM,
Post: #12
|
|||
|
|||
RE: Passat B6 EDC17CP14 cloning
Hi Buzzard!
Thank you for read and help me! I am write new ecu immo off.rar you flash and eeprom immo off, car no start. Starter turns. |
|||
05-08-2016, 18:56 PM,
Post: #13
|
|||
|
|||
RE: Passat B6 EDC17CP14 cloning
Did you say you write .rar file to ecu or did you unzip it first ? I am assuming you unzipped it first.
Your ecu is no good Griff, if it was any good car would start. Immo off is 100% Sent from my SM-N910F using Tapatalk All VAG immo off or transfer - change Power Class up to & including WFS6 SHE -VAG DCM 6.2 3.7 - immo off also Bcm2, Elv, TC DSG DL381 DQ200 DQ250 DQ400 DQ500: Here:
AKL MQB - + A6-A7-A8-Touareg- generate sync key file - Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need. |
|||
05-08-2016, 19:33 PM,
Post: #14
|
|||
|
|||
RE: Passat B6 EDC17CP14 cloning
(05-08-2016, 18:56 PM)Buzzard Wrote: Did you say you write .rar file to ecu or did you unzip it first ? I am assuming you unzipped it first.If on work car dashboard to disable, auto start up normally? New ecu desold from work car 100%. sorry for my bad English..... |
|||
05-08-2016, 20:00 PM,
Post: #15
|
|||
|
|||
RE: Passat B6 EDC17CP14 cloning
(05-08-2016, 19:33 PM)Griff Wrote:Griff I cannot understand what you are trying to say to me mate.(05-08-2016, 18:56 PM)Buzzard Wrote: Did you say you write .rar file to ecu or did you unzip it first ? I am assuming you unzipped it first.If on work car dashboard to disable, auto start up normally? New ecu desold from work car 100%. 1. Immo off files 100% car should start with these files. 2. No start = ecu is broken, kaput. Do whatever you want with the new ecu, and if you want to test it afterwards, use the immo off files. If ecu is good car will start. Sent from my SM-N910F using Tapatalk All VAG immo off or transfer - change Power Class up to & including WFS6 SHE -VAG DCM 6.2 3.7 - immo off also Bcm2, Elv, TC DSG DL381 DQ200 DQ250 DQ400 DQ500: Here:
AKL MQB - + A6-A7-A8-Touareg- generate sync key file - Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need. |
|||
05-08-2016, 20:28 PM,
Post: #16
|
|||
|
|||
RE: Passat B6 EDC17CP14 cloning
OK, I'am check again and report.
|
|||
07-08-2016, 13:31 PM,
Post: #17
|
|||
|
|||
RE: Passat B6 EDC17CP14 cloning
(05-08-2016, 20:28 PM)Griff Wrote: OK, I'am check again and report. Griff I dont think this is going to help you much, but here is your modfile with immo off and csok I think If I understand correctly, you have copied the OTP addresses from new ecu flash file, and written them over the old ecu flash file so you can write to ecu with galletto that should work if the ecu is ok. All VAG immo off or transfer - change Power Class up to & including WFS6 SHE -VAG DCM 6.2 3.7 - immo off also Bcm2, Elv, TC DSG DL381 DQ200 DQ250 DQ400 DQ500: Here:
AKL MQB - + A6-A7-A8-Touareg- generate sync key file - Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need. |
|||
Reputation: +1 - Griff [+1] | |||
07-08-2016, 14:09 PM,
Post: #18
|
|||
|
|||
RE: Passat B6 EDC17CP14 cloning
(07-08-2016, 13:31 PM)Buzzard Wrote:yes, i am chek tomorow and report. Big thanks!!!(05-08-2016, 20:28 PM)Griff Wrote: OK, I'am check again and report. |
|||
07-11-2016, 23:51 PM,
Post: #19
|
|||
|
|||
RE: Passat B6 EDC17CP14 cloning
ECU was not working bought another, help the Old ECU clone another New2 ECU. Thanks....
it is very necessary to have a car |