Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
CarProg unlock full no counter
30-06-2014, 20:49 PM,
Post: #11
|
|||
|
|||
RE: CarProg unlock full no counter
(30-06-2014, 16:43 PM)flavyus1987 Wrote: I took 3 pins from an old mother board and soldered on CP board, and i use a jumper to select pin 55 for erase. Thank you for reply What you mean by 3 pins from old MB, do you have picture please. About the jumper- do you mean raising the 55 leg and soldering to erase pin? Thank you again |
|||
01-07-2014, 10:08 AM,
Post: #12
|
|||
|
|||
RE: CarProg unlock full no counter
He means he took 3 pins (header strips with jumper blocks) from an old computer motherboard
and soldered to carprog pcb so he dont have to unsolder and resolder to pin 55 all the time if my post helps please give Reputation and Thanks
|
|||
29-05-2015, 19:04 PM,
Post: #13
|
|||
|
|||
RE: CarProg unlock full no counter
I need a pass pls
|
|||
30-08-2015, 09:23 AM,
Post: #14
|
|||
|
|||
RE: CarProg unlock full no counter
About this procedure of lifting the pin55 can some one explain how it works. if you lift the pin then the CP will reset? or you need to attach the pin somewhere? thanks in advance
|
|||
31-08-2015, 12:54 PM,
Post: #15
|
|||
|
|||
RE: CarProg unlock full no counter
(30-08-2015, 09:23 AM)spanaz1 Wrote: About this procedure of lifting the pin55 can some one explain how it works. if you lift the pin then the CP will reset? or you need to attach the pin somewhere? thanks in advance if you did more reading on reflashing carprog you will find the answers you are looking for and exactly what to do with pin 55 just look. if my post helps please give Reputation and Thanks
|
|||
22-12-2015, 20:16 PM,
Post: #16
|
|||
|
|||
RE: CarProg unlock full no counter
I want my CARPROG 4.74, to reflash
Open me CARPROG I see 2x pin wire on the mcu pin55 How do I program this CARPROG. thank you |
|||
16-06-2016, 06:25 AM,
Post: #17
|
|||
|
|||
RE: CarProg unlock full no counter
(22-12-2015, 20:16 PM)tiguan Wrote: I want my CARPROG 4.74, to reflashtwo point is GND. you can watch this video to reflash your carprog. |