Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Help with dead CHAMP/MASK bmw E60 2003
|
19-08-2016, 10:13 AM,
Post: #1
|
|||
|
|||
Help with dead CHAMP/MASK bmw E60 2003
Hi everyone. Here is my issue. After replasing AHL module i tried to code it to my car (BMW E60 2003y) with icom a/b and ISTA/P. After checking the car ista/p recomends me to update/code some modules. I accept the plan and ista start to program first CAS then tried to program GW (part of M-ASK-Aggregat) in this momment the power dropped below 13v (something go wrong with my charger) and ispa/p abborted the session. Now i have no M-ASK,no displey,no music nothing. Ista/d told me that M-ASK is in program aborting state. Ista/p want to enter :
Part number of the basic control module NAV Part number of the basic control module AUD Part number of programmed control module AUD Part number of the basic control module CHAMP-S/M-ASK-S Part number of programmed control module CHAMP-S/M-ASK-S Part number of the basic control module BO Part number of programmed control module BO Part number of the basic control module CHAMP-H/M-ASK-H/CIC-H Can someone to help me? |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
19-08-2016, 11:04 AM,
Post: #2
|
|||
|
|||
|
RE: Help with dead CIC bmw E60 2003
Eeehm first;
I never see a E60 with an CIC. Its an CHAMP/MASK. i don't know about your CAR, has the car an MOST-Connector? I think thats the result from programming a car without power supply. (not your fault when the charger bricks) CONNECT AN POWER SUPPLY and try to flash with WINKFP. If my post helped you hit the thanks and reputation button.
 BMW F32 435d xDrive Coupe 12/2016 - Stage 2  609 + 7XP NBT EVO | 6NW Wireless Charging | 6WD WLAN-Hotspot Retrofits: 6WB Black Panel Cluster| 337 M-Sport Package | 715 M-Aerodynamic Package | 7XA M-Steering Wheel + Shift Padles | HELC LCI Tail lights | 3AG Rear View Camera | 5A1 LED fog lights | 552 adaptive LED Headlights | 430 Interior/Exterior Mirror Package | 760 Shadow-Line | 8TN Option iDrive DRL | 8TL DRL with Rear lights | OMSA SSA Memory | 4WD Laptimer | 6CP CarPlay | 6NR BMW Apps | 248 Steering heating | 6AS Driving Assistent with Front Collision Warning, People Warning and Lane Change Warning + Yamaha R6 RJ09 10/2004 - Stage 1  |
|||
|
|
|
19-08-2016, 11:19 AM,
Post: #3
|
|||
|
|||
|
RE: Help with dead CIC bmw E60 2003
Sorry my fault. I do not have WINKFP. I have MOST-connector and icom is linked to it.
|
|||
|
|
|
20-08-2016, 06:31 AM,
Post: #4
|
|||
|
|||
|
RE: Help with dead CHAMP/MASK bmw E60 2003
Ok. I have working WINKFP already with 55.0 SP-Data for E60. A question? You said i should flash with WINKFP ,but Ista/p birngs several modules for M-ASK Aggregat : M-ASK gateway(GW),NAV,BO,M-ASK(AUD),CHAMP/M-ASK,CCC CHAMP-/M-ASK-H,M-ASK-DVD. When i looked in WINKFP via Enter ZUSB button, i can't find by part numbers NAV,CCC CHAMP and M-ASK DVD. What should I do?
 . Shuold i flash only GW because ista/p interrupted in this module or what?
|
|||
|
|
|
20-08-2016, 06:51 AM,
Post: #5
|
|||
|
|||
|
RE: Help with dead CHAMP/MASK bmw E60 2003
Hi,
I suggest you delete from VO TCU/ULF or whatever car have plug out TCU socket from module and bridge most then start again ista p, that should be help you.After back to life your ccc put back tcu to VO. Good luck.... |
|||
|
|
|
02-10-2016, 16:25 PM,
(This post was last modified: 02-10-2016, 16:40 PM by dragonfly74.)
Post: #6
|
|||
|
|||
|
RE: Help with dead CHAMP/MASK bmw E60 2003
Hi, guys.I have no luck so far . I have disconnected my aftermarket bluetooth from M-ASK and tried to program with ISTA/P with no luck. (did not change VO, because there is no bluetooth). Tried to flush BO with Winkfp but recieved error "most is ok but module not responding" .
A question. Can I determine the right ZB for Winkfp if i have the part number of M-ASK which is 65.12-6 965 045 ? |
|||
|
|
|
03-10-2016, 10:30 AM,
Post: #7
|
|||
|
|||
|
RE: Help with dead CHAMP/MASK bmw E60 2003
Ok. Problem solved. Found the corect ZB number of MOST/CAN Gateway MASK via INPA and flush the module with Winkfp. Еverything is back to normal and i am very happy
 .
|
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
|
|
E60 MASK NAVI Update for welcome lights? | kimz | 4 | 704 |
10-04-2024, 17:02 PM Last Post: johann74270 |
| F48 BDC_Gw dead | qbek90 | 4 | 274 |
30-03-2024, 04:22 AM Last Post: qbek90 |
|
| ZGW2 dead can be rescued? | walkernight88 | 5 | 368 |
16-03-2024, 21:15 PM Last Post: walkernight88 |
|
| Bmw/Mini cic/champ emulator e9x 66x Rxx | megalo84 | 4 | 300 |
29-01-2024, 22:14 PM Last Post: miskoh |
|
|
|
Mask 2 Repair Bootloop | Pietro.Montana | 1 | 238 |
27-12-2023, 10:09 AM Last Post: Volum |
| EVO dead after flashing | laso | 17 | 2,207 |
22-09-2023, 17:43 PM Last Post: diagso |
|
| Solved ✔ BMW E61, can't connect to CHAMP HU with NCS | GoNz0- | 10 | 597 |
21-09-2023, 20:05 PM Last Post: GoNz0- |
|
|
|
BMW F20 FEM dead / how to repair? | bmw335coding | 0 | 280 |
20-08-2023, 15:30 PM Last Post: bmw335coding |
|
|
MC9S12XF384 2M64j mask | prikitiew | 2 | 331 |
11-08-2023, 13:53 PM Last Post: Spitfire555 |
|
|
BMW MASK (BUSINESS) flash update language | adiel3 | 1 | 407 |
26-07-2023, 17:24 PM Last Post: Spitfire555 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
