Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Peugeot partner no rear lights
19-08-2016, 18:26 PM,
Post: #1
|
|||
|
|||
Peugeot partner no rear lights
Hi, can anyone help I have a 2008 Peugeot partner van that I changed the bsi and ecu in and now has no rear lights. Don't know weather it has to do with the Change over. Any advice would be greatly appreciated.
|
|||
29-08-2016, 06:17 AM,
Post: #2
|
|||
|
|||
RE: Peugeot partner no rear lights
Look for a short rear harnes , lamps etc.
Mayby , wires harnes of trailer socket? If not short - reset bsi (with manual procedure not diag tool) Bsi reset its posible only few times! If my post was helpful, please take the time to click THANKS and REP. button
|
|||
29-08-2016, 08:16 AM,
Post: #3
|
|||
|
|||
RE: Peugeot partner no rear lights
Were your rear lights working before you changed your ECU and BSI............?
If yes than there is nothing wrong with your wiring.........Its to do with your BSI, Check the configurations in BSI or, the BSI is faulty........ What was the reason to change the ECU and BSI............? If My Post Was Helpful
Than Please Click On Thanks & Rep.. |
|||
30-09-2016, 21:54 PM,
Post: #4
|
|||
|
|||
RE: Peugeot partner no rear lights
It is well know fault with this BSI .Radio and dash need coded to ecu or you will hear a beeping from the radio.
|
|||
20-10-2016, 19:32 PM,
(This post was last modified: 20-10-2016, 19:33 PM by bob.)
Post: #5
|
|||
|
|||
RE: Peugeot partner no rear lights
|
|||
23-12-2016, 23:03 PM,
Post: #6
|
|||
|
|||
RE: Peugeot partner no rear lights
This can be a problem frayed wires.
It may be no ground. Unscrew the lamp, use a multimeter and check if there is voltage |
|||
11-01-2017, 14:36 PM,
Post: #7
|
|||
|
|||
RE: Peugeot partner no rear lights
Please check all globes in rear if one is open circuited then bsi will not output a feed to operate rear lights, similar to some peugeot boxers
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content