Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Chiptuning remove by ISTA-P or WINKFP?
|
25-08-2016, 08:36 AM,
Post: #1
|
|||
|
|||
Chiptuning remove by ISTA-P or WINKFP?
Hi guys,
i have an easy question. When a car is tuned by BDM, for example BMW E90 320d with tuning protection (no tuning over obd), remove ISTA-P these chip completely when i program the DDE new? If my post helped you hit the thanks and reputation button.
 BMW F32 435d xDrive Coupe 12/2016 - Stage 2  609 + 7XP NBT EVO | 6NW Wireless Charging | 6WD WLAN-Hotspot Retrofits: 6WB Black Panel Cluster| 337 M-Sport Package | 715 M-Aerodynamic Package | 7XA M-Steering Wheel + Shift Padles | HELC LCI Tail lights | 3AG Rear View Camera | 5A1 LED fog lights | 552 adaptive LED Headlights | 430 Interior/Exterior Mirror Package | 760 Shadow-Line | 8TN Option iDrive DRL | 8TL DRL with Rear lights | OMSA SSA Memory | 4WD Laptimer | 6CP CarPlay | 6NR BMW Apps | 248 Steering heating | 6AS Driving Assistent with Front Collision Warning, People Warning and Lane Change Warning + Yamaha R6 RJ09 10/2004 - Stage 1  |
|||
|
|
25-08-2016, 10:27 AM,
Post: #2
|
|||
|
|||
RE: Chiptuning remove by ISTA-P or WINKFP?
(25-08-2016, 08:36 AM)bmw335coding Wrote: Hi guys, Hi, I believe answer to that is YES. ECU should be completely re flashed (when appropriate checkbox selected in ISTA P. |
|||
|
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
2 users say Thank You to mort_ba for this post |
|
26-08-2016, 05:59 AM,
Post: #3
|
|||
|
|||
|
RE: Chiptuning remove by ISTA-P or WINKFP?
Just use the update function of winkfp!
you dont read dde7.1 with tuningprotection via bdm. its jtag plus boot mode. |
|||
|
|
|
26-08-2016, 08:54 AM,
Post: #4
|
|||
|
|||
|
RE: Chiptuning remove by ISTA-P or WINKFP?
Reflashing you DDE/DME by ISTA-P or WINKFP will 100% remove the old tuning file and replace it by OEM sw.
|
|||
|
|
|
28-08-2016, 19:00 PM,
Post: #5
|
|||
|
|||
|
RE: Chiptuning remove by ISTA-P or WINKFP?
I'm not sure about the E series, but for new F-series the only way ISTA can be used to wipe over a flash tune is when connected to the ISIS network. So only one who can overwrite a flash tune a BMW dealer connected to the BMW Network.
If this post helped you in anyway please use the thanks and/or REP buttons down here.
 Thanks! |
|||
|
|
|
28-08-2016, 19:54 PM,
Post: #6
|
|||
|
|||
|
RE: Chiptuning remove by ISTA-P or WINKFP?
For F20 and F30, both ISTA/P and E-sys can "restore" the benchflash tuning, just tried on last week.
|
|||
|
|
|
29-08-2016, 14:06 PM,
Post: #7
|
|||
|
|||
Chiptuning remove by ISTA-P or WINKFP?
(28-08-2016, 19:54 PM)simonchs Wrote: For F20 and F30, both ISTA/P and E-sys can "restore" the benchflash tuning, just tried on last week. So have I without success. Wasn't trying to remove the tuning but I was upgrading firmware and coding the DME module. Sent from my iPhone using Tapatalk If this post helped you in anyway please use the thanks and/or REP buttons down here.
Thanks! |
|||
|
|
|
30-08-2016, 04:21 AM,
Post: #8
|
|||
|
|||
Chiptuning remove by ISTA-P or WINKFP?
(29-08-2016, 14:06 PM)cryptocar Wrote:(28-08-2016, 19:54 PM)simonchs Wrote: For F20 and F30, both ISTA/P and E-sys can "restore" the benchflash tuning, just tried on last week. Upgrading or select checkbox program to the ECU? If my post helped you hit the thanks and reputation button.
BMW F32 435d xDrive Coupe 12/2016 - Stage 2 609 + 7XP NBT EVO | 6NW Wireless Charging | 6WD WLAN-Hotspot Retrofits: 6WB Black Panel Cluster| 337 M-Sport Package | 715 M-Aerodynamic Package | 7XA M-Steering Wheel + Shift Padles | HELC LCI Tail lights | 3AG Rear View Camera | 5A1 LED fog lights | 552 adaptive LED Headlights | 430 Interior/Exterior Mirror Package | 760 Shadow-Line | 8TN Option iDrive DRL | 8TL DRL with Rear lights | OMSA SSA Memory | 4WD Laptimer | 6CP CarPlay | 6NR BMW Apps | 248 Steering heating | 6AS Driving Assistent with Front Collision Warning, People Warning and Lane Change Warning + Yamaha R6 RJ09 10/2004 - Stage 1 |
|||
|
|
|
30-08-2016, 18:52 PM,
Post: #9
|
|||
|
|||
Chiptuning remove by ISTA-P or WINKFP?
(30-08-2016, 04:21 AM)bmw335coding Wrote:(29-08-2016, 14:06 PM)cryptocar Wrote:(28-08-2016, 19:54 PM)simonchs Wrote: For F20 and F30, both ISTA/P and E-sys can "restore" the benchflash tuning, just tried on last week. Upgrading istep levels. Full reprogramming of ECU and then encoding of the new firmware using ISTA. Sent from my iPhone using Tapatalk If this post helped you in anyway please use the thanks and/or REP buttons down here.
Thanks! |
|||
|
|
|
31-08-2016, 06:56 AM,
Post: #10
|
|||
|
|||
|
RE: Chiptuning remove by ISTA-P or WINKFP?
Hello!
When you update a DME/DDE you will wipe out the tuning. But therefore it's necessary to flash the hole ECU, not only a part of it (only new CAFD for example). If you are using E-Sys you have to manipulate the SVT_IST (for Bootloader, CAFD and SWFL). In that acse you will get a clean DME/DDE (tried it several times with success). CU Oliver |
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
