Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Chiptuning remove by ISTA-P or WINKFP?
01-09-2016, 00:33 AM,
Post: #11
Chiptuning remove by ISTA-P or WINKFP?
(31-08-2016, 06:56 AM)milkyway Wrote:  Hello!

When you update a DME/DDE you will wipe out the tuning. But therefore it's necessary to flash the hole ECU, not only a part of it (only new CAFD for example). If you are using E-Sys you have to manipulate the SVT_IST (for Bootloader, CAFD and SWFL). In that acse you will get a clean DME/DDE (tried it several times with success).

CU Oliver


Not true. The eeprom which holds the tuning maps are not accessible via OBD in stock formatting (not unlocked using something like CMD Flash plugin). Only way it can wiped out is with a special update from BMW that has been signed by BMW with their key something that can only be done while connected to the ISIS network. Also BMW does not release tuning file updates regularly so it's unlikely you will have your tune wiped out by a firmware upgrade.


Sent from my iPhone using Tapatalk

If this post helped you in anyway please use the thanks and/or REP buttons down here.under Thanks!
Quote this message in a reply
[+] 2 users say Thank You to cryptocar for this post
01-09-2016, 13:57 PM,
Post: #12
RE: Chiptuning remove by ISTA-P or WINKFP?
(01-09-2016, 00:33 AM)cryptocar Wrote:  
(31-08-2016, 06:56 AM)milkyway Wrote:  Hello!

When you update a DME/DDE you will wipe out the tuning. But therefore it's necessary to flash the hole ECU, not only a part of it (only new CAFD for example). If you are using E-Sys you have to manipulate the SVT_IST (for Bootloader, CAFD and SWFL). In that acse you will get a clean DME/DDE (tried it several times with success).

CU Oliver


Not true. The eeprom which holds the tuning maps are not accessible via OBD in stock formatting (not unlocked using something like CMD Flash plugin). Only way it can wiped out is with a special update from BMW that has been signed by BMW with their key something that can only be done while connected to the ISIS network. Also BMW does not release tuning file updates regularly so it's unlikely you will have your tune wiped out by a firmware upgrade.


Sent from my iPhone using Tapatalk


Are you sure maps are in eeprom ?
I think maps are in flash memory. In some older ECUs flash is accessible by ODB, in most new ones only on bench because of tunning protection. BMW software can reprogram flash by OBD and you get clean original BMW maps.
Quote this message in a reply
[+] 2 users say Thank You to osd for this post
01-09-2016, 17:43 PM,
Post: #13
Chiptuning remove by ISTA-P or WINKFP?
(01-09-2016, 00:33 AM)cryptocar Wrote:  
(31-08-2016, 06:56 AM)milkyway Wrote:  Hello!

When you update a DME/DDE you will wipe out the tuning. But therefore it's necessary to flash the hole ECU, not only a part of it (only new CAFD for example). If you are using E-Sys you have to manipulate the SVT_IST (for Bootloader, CAFD and SWFL). In that acse you will get a clean DME/DDE (tried it several times with success).

CU Oliver


Not true. The eeprom which holds the tuning maps are not accessible via OBD in stock formatting (not unlocked using something like CMD Flash plugin). Only way it can wiped out is with a special update from BMW that has been signed by BMW with their key something that can only be done while connected to the ISIS network. Also BMW does not release tuning file updates regularly so it's unlikely you will have your tune wiped out by a firmware upgrade.


Sent from my iPhone using Tapatalk



Your answer is not true, all maps are stored in flash.
I read often tuning protected EDC17 ecus, in eeprom is only vin, isn and other informations.
I tested on e-models, program with winkfp remove the chip completly!

If my post helped you hit the thanks and reputation button. handshakehandshakehandshake

BMW F32 435d xDrive Coupe 12/2016 - Stage 2 drivedrivedrive
609 + 7XP NBT EVO | 6NW Wireless Charging | 6WD WLAN-Hotspot
Retrofits:
6WB Black Panel Cluster| 337 M-Sport Package | 715 M-Aerodynamic Package | 7XA M-Steering Wheel + Shift Padles | HELC LCI Tail lights | 3AG Rear View Camera | 5A1 LED fog lights | 552 adaptive LED Headlights | 430 Interior/Exterior Mirror Package | 760 Shadow-Line | 8TN Option iDrive DRL | 8TL DRL with Rear lights | OMSA SSA Memory | 4WD Laptimer | 6CP CarPlay | 6NR BMW Apps | 248 Steering heating | 6AS Driving Assistent with Front Collision Warning, People Warning and Lane Change Warning
+
Yamaha R6 RJ09 10/2004 - Stage 1 bikerbikerbiker
Quote this message in a reply
[+] 2 users say Thank You to bmw335coding for this post
01-09-2016, 19:17 PM,
Post: #14
RE: Chiptuning remove by ISTA-P or WINKFP?
(01-09-2016, 17:43 PM)bmw335coding Wrote:  I think maps are stored in flash. I read often tuning protected EDC17 ecus, in eeprom is only vin, isn and other informations. I tested on e-models, program with winkfp remove the chip completly!

agree 100%. Tested by myself!
Quote this message in a reply
01-09-2016, 21:52 PM,
Post: #15
RE: Chiptuning remove by ISTA-P or WINKFP?
Since over 10 years ago, Tuningmaps are in flash.
EDC16,17, MEVDxy, MSD8x, MSS6x, ... I've done a lot of them. All tuningdata stored in flash
Quote this message in a reply
[+] 2 users say Thank You to Stiffmaster for this post
02-09-2016, 10:59 AM,
Post: #16
RE: Chiptuning remove by ISTA-P or WINKFP?
After the reprogram from the DDE and clear info and fault memory, ISTA doesnt detect the tuning over FASTA-Data.

Is there a way to clear the FASTA-Data with tuned DDE?
Can we read the FASTA-Data like max. speed, max rpm, max boost and so one?

If my post helped you hit the thanks and reputation button. handshakehandshakehandshake

BMW F32 435d xDrive Coupe 12/2016 - Stage 2 drivedrivedrive
609 + 7XP NBT EVO | 6NW Wireless Charging | 6WD WLAN-Hotspot
Retrofits:
6WB Black Panel Cluster| 337 M-Sport Package | 715 M-Aerodynamic Package | 7XA M-Steering Wheel + Shift Padles | HELC LCI Tail lights | 3AG Rear View Camera | 5A1 LED fog lights | 552 adaptive LED Headlights | 430 Interior/Exterior Mirror Package | 760 Shadow-Line | 8TN Option iDrive DRL | 8TL DRL with Rear lights | OMSA SSA Memory | 4WD Laptimer | 6CP CarPlay | 6NR BMW Apps | 248 Steering heating | 6AS Driving Assistent with Front Collision Warning, People Warning and Lane Change Warning
+
Yamaha R6 RJ09 10/2004 - Stage 1 bikerbikerbiker
Quote this message in a reply
21-01-2017, 15:17 PM,
Post: #17
RE: Chiptuning remove by ISTA-P or WINKFP?
Any ideas how to put that map back again? e90 320d 163 EDC16
Quote this message in a reply
23-01-2017, 18:34 PM, (This post was last modified: 25-01-2017, 11:15 AM by Clusters.)
Post: #18
RE: Chiptuning remove by ISTA-P or WINKFP?
(21-01-2017, 15:17 PM)Pawel M Wrote:  Any ideas how to put that map back again? e90 320d 163 EDC16

Go to your tuner and pay him to upload tune again

Remote Coding /// FSC Codes /// BMW Retrofit Codes /// Carplay activation


Vzdialené Kódovanie /// FSC kódy /// BMW Retrofit kódy /// Aktivácia Carplay

Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  ista 4.46 Standalone kiranabc 33 2,936 1 hour ago
Last Post: Siki78
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,648 627,482 3 hours ago
Last Post: Sedoy
  ista for use whit vcx se db8000 0 29 5 hours ago
Last Post: db8000
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 303 10 hours ago
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,311 Yesterday, 20:02 PM
Last Post: Node
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,448 Yesterday, 10:39 AM
Last Post: MINIGP1610
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 125 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 156 26-03-2024, 05:11 AM
Last Post: 2013m5
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 666 25-03-2024, 08:11 AM
Last Post: Node
XZBMW WinKFP can't find ZUSB 6957356 andre426hemi 4 204 25-03-2024, 00:40 AM
Last Post: armenh7

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content