[cursor]

Hi

My CCC in pre LCI E60 was broken
I want use a LCI CCC(HW12.7), but i change front of CCC back to the oldest(from pre-LCI model).
When i do this, the CCC is still rebooting. The same thing when is broken.
When i put back LCI front, it's working properly.

What I must do to make this?

All modules without application i flashed and coded to right version
Its problem with Cappl, and i must flash it with correct software?

[Paul]

Hi

My CCC in pre LCI E60 was broken
I want use a LCI CCC(HW12.7), but i change front of CCC back to the oldest(from pre-LCI model).
When i do this, the CCC is still rebooting. The same thing when is broken.
When i put back LCI front, it's working properly.

What I must do to make this?

All modules without application i flashed and coded to right version
Its problem with Cappl, and i must flash it with correct software?

I had same problem last Year, you can not use front from pre LCI in LCI CCC. I have open both front and Hardware inside the front is otherwise, not only bottons.

---

[cursor]

I have CCC from E63/E64. HW12.4

Mainboard look the same, and this CCC have pre-LCI front

[zeronoo]

Old faceplate don't work in any way with new ccc, you need to buy lci mask and a/c panel, do a little work on a/c wiring then code ccc with lci year