Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Xentry OpenShell PassThru 09-10-11.2016
22-11-2016, 16:34 PM,
Post: #18
|
|||
|
|||
RE: Xentry OpenShell PassThru 09-10-11.2016
(22-11-2016, 16:10 PM)bibkare Wrote: First of all great job CATAHA, i installed 05-2016 xentry passthru and it works OK with VAS5054 except VAS can't see proper CAR voltage (it shows constant 12V on first DAS window). I also tried to connect with x-horse MVCI and this time MVCI detects proper voltage however it could connect to only 2 modules on w211 while VAS could connect to all except SBC/ESP. Does anybody knows solution for VAS and voltage reading. I will open MVCI and compare it to VAS to try solve this. Post result in this thread.From what i can remember since last week i was able to read all modules on w204 c230 and clear codes... i don't remember about voltage... but i'll comeback to it once i'll use it again and have more time(like an after hours thing) On Another Note here is a PIN-OUTS for VAS5054 and site that shows some pinouts |