Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Xentry OpenShell PassThru 09-10-11.2016
25-11-2016, 12:22 PM,
Post: #23
|
|||
|
|||
RE: Xentry OpenShell PassThru 09-10-11.2016
I tested and if leave like this "[GLOBAL] IGNITION =OFF " then no connection at all. There is another settings in C:\program file\mercdes-benz\DAS\bin\cal.ini where you can enable or disable passthru device to read voltage. I set value from 1 to 0 and then DAS shows value from global.sim BATTERY_VOLTAGE = 12.5 and if it is value=1 then shows IGNITION_VOLTAGE = 12.0. This was tested on VAS5054 however x-horse MVCI "see" correct voltage but can't connect to all modules for example it coudn't read SAM in ML164 while VAS5054 reads all modules.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
10 Guest(s)
10 Guest(s)
Return to TopReturn to Content