Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Xentry OpenShell PassThru 09-10-11.2016
15-11-2017, 00:24 AM,
(This post was last modified: 18-11-2017, 12:23 PM by HERVE06300.)
Post: #71
|
|||
|
|||
RE: Xentry OpenShell PassThru 09-10-11.2016
|
|||
16-11-2017, 15:15 PM,
Post: #72
|
|||
|
|||
RE: Xentry OpenShell PassThru 09-10-11.2016
1. That is by far the worst VAS5054a clone I have seen.
2. You need to be on Win 7-10 32-bit and install the drivers correctly. See the instructions, they were very well written. |
|||
16-11-2017, 16:44 PM,
(This post was last modified: 16-11-2017, 17:02 PM by Clusters.)
Post: #73
|
|||
|
|||
RE: Xentry OpenShell PassThru 09-10-11.2016
1. That is by far the worst VAS5054a clone I have seen.
That's I supposed 2. You need to be on Win 7-10 32-bit and install the drivers correctly. See the instructions, they were very well written. I do all but I plug vas5054a (I block W10 to install automatically drivers) I see Vas5054 i make "driver update" and i chose good place But I Have "no driver found" I suppose my vas5054 is very bad But work to read audi s4 b8 (usb mode only) |
|||
17-11-2017, 00:57 AM,
Post: #74
|
|||
|
|||
RE: Xentry OpenShell PassThru 09-10-11.2016
Another question
Tomorrow I can use original KTS of a friend How I can change vas5054a passthru to kts pasthru in xentry ? |
|||
02-12-2017, 16:18 PM,
Post: #75
|
|||
|
|||
RE: Xentry OpenShell PassThru 09-10-11.2016
With a new vas5054a vci works fine with
smart 450 (kiss point of clutch) smart 451 (kiss point of clutch) The only think is when ignition on/off : FIRST TIME USE THE KEY after change the file But don't work with w208.444 2002 normal or not ? |
|||
03-12-2017, 23:19 PM,
(This post was last modified: 03-12-2017, 23:21 PM by konstantin82.)
Post: #76
|
|||
|
|||
RE: Xentry OpenShell PassThru 09-10-11.2016
No pass in DAS special function. Copy that file in folder where DAS instaled.
I recomend not fully replace the old one. Just rename it. Then paste that file. |