[Johnnyw]

Hello again!

i had one spare ecu that i mixed with now... does this seems right to you? i read eeprom from spare ecu and first desolder it with heatgun.

dont need immo off for this but just want to know if its read right and all looks good?

---

Hello again!

i had one spare ecu that i mixed with now... does this seems right to you? i read eeprom from spare ecu and first desolder it with heatgun.

dont need immo off for this but just want to know if its read right and all looks good?

[Dash_Burner]

Hello again!

i had one spare ecu that i mixed with now... does this seems right to you? i read eeprom from spare ecu and first desolder it with heatgun.

dont need immo off for this but just want to know if its read right and all looks good?

---

Hello again!

i had one spare ecu that i mixed with now... does this seems right to you? i read eeprom from spare ecu and first desolder it with heatgun.

dont need immo off for this but just want to know if its read right and all looks good?

Listen mate. I read your thread today. The job you want to do in the car you want to work for is not so easy as you think. Many people working for years and still have problems doing immo of or reprogramming ecus. If you want to start doing this job before you start questions and before buying any equipment i suggest you 3 thinks : study-study-study.Many people think that its a kind of work that can be done with a push of a button. I dont think so.
For the momment go to a garage and find people who are familiar with this kind of works.

[Johnnyw]

Hello again!

i had one spare ecu that i mixed with now... does this seems right to you? i read eeprom from spare ecu and first desolder it with heatgun.

dont need immo off for this but just want to know if its read right and all looks good?

---

Hello again!

i had one spare ecu that i mixed with now... does this seems right to you? i read eeprom from spare ecu and first desolder it with heatgun.

dont need immo off for this but just want to know if its read right and all looks good?

Listen mate. I read your thread today. The job you want to do in the car you want to work for is not so easy as you think. Many people working for years and still have problems doing immo of or reprogramming ecus. If you want to start doing this job before you start questions and before buying any equipment i suggest you 3 thinks : study-study-study.Many people think that its a kind of work that can be done with a push of a button. I dont think so.
For the momment go to a garage and find people who are familiar with this kind of works.

ok so my eeprom reading is no good?

[Johnnyw]

And this is what i came up with on immo off....

[domelec]

Have you read anything i posted?
have you checked the adapters and carprog for any rework needed?
i think you ignored everything i have told you to do and just wanting quick fixes
if you dont do what i have said then you will never know if your carprog is good or not

[Johnnyw]

Have you read anything i posted?
have you checked the adapters and carprog for any rework needed?
i think you ignored everything i have told you to do and just wanting quick fixes
if you dont do what i have said then you will never know if your carprog is good or not

i read you post but in the same time others post on diffrent sites.

the eeprom post i did before was just fine, i posted it on another site and they helped med with immo off. dont understand why it should be so hard to just tell me my reading was ok??

im new at this but i aint going to only read, i want to do some practice as well, wich i did ok this time but got strange feedback from u and that i dont understan? i used my carpog just as it was from china to read/writ my desoldered eeprom btw....

[domelec]

You got strange feedback from me??????
i asked you to make sure everything was wired correctly in the adapter has mine was not wired correctly
i also asked you to check the carprog hardware to see if it needed rework as theres many threads stating the same.
i could have downloaded your file and said yes this is fine or not but then you wouldnt learn anything
like i said the first thing to do with any china clone is check to see what rework they need doing so then you wont have problems in future.
but you just wanted a quick answer of yes the read is ok etc
which in my opinion isnt helping, not everyones carprog works out the box.