Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. Martech

  2. ATM - Balkan

    atm balkan file service
  3. Kess Ktag

  4. MOD FILES

  5. ProCarDiag

  6. ECU CHIPS

  7. NBE Files



Post Reply 
Fiat Multiecuscan v3.1 Full Registered
05-09-2016, 14:25 PM
Post: #1
JFiat Fiat Multiecuscan v3.1 Full Registered
Here is Fiat Multiecuscan v3.1 Full Registered
Fiat Multiecuscan v3.1 Full Registered.rar
File Type: .rar
Downloaded: 897 times
Size: 233 bytes

Reputation: +24 - McMihai [+1] , josef [+1] , cicko [+1] , ikkuh007 [+1] , lariusmaximus [+1] , ombra [+1] , WinMX354 [+1] , colt2096 [+1] , t1tan1 [+1] , alexandr1966 [+1] , jenny123 [+1] , mikajna [+1] , ocostel [+1] , bekimc [+1] , rkaynak [+1] , nfcvagservice [+1] , Arual [+1] , joe06 [+1] , pankar [+1] , som3astar [+1] , bogo75 [+1] , txalkie [+1] , rozzie [+1] , _estima_ [+1]
Find all posts by this user
Quote this message in a reply
 Thanks given by: alex68 , McMihai , josef , cicko , advanced , Errecinque , felipe29 , fusername , galaxia , ombra , WinMX354 , NISMAXIMASAN , Bedik , cars2011 , rale1 , colt2096 , vinzy , evgenitatev , misterrob , t1tan1 , don007 , Arual , destroyer , jenny123 , beta , jollyyob , mikajna , mickye_dj , atomantmk , izi91 , Danielz90 , bob , ocostel , acerRI , bekimc , Matrixcod , rkaynak , javier150 , nfcvagservice , hercaim38 , LUTHOR , ivan , Mdalat , Michael1 , ampelos , qwerx , xmanez , colin6775 , Thunderbolt , mexanico1971 , theoalex , joe06 , vdgle , DevrimDemirkan , gluck , pankar , som3astar , alexander_gre , bibkare , chawi2012 , intruder , marcolino , googleit , michalkow , DREAMERI , maximillen , wim , erich.hai , notas , bogo75 , txalkie , jmgameiro , delta9 , Pepsp , nikifer , rozzie , _estima_ , mtsoftware , toprak16
09-09-2016, 09:16 AM
Post: #2
RE: Fiat Multiecuscan v3.1 Full Registered
Thanks for the program. I never seen it before and search for some information. Can you with this software read fault codes, but also change settings on the car (like VCDS)?
Reputation: 0 - t1tan1 [0]
Find all posts by this user
Quote this message in a reply
09-09-2016, 13:17 PM
Post: #3
RE: Fiat Multiecuscan v3.1 Full Registered
VCD is similar, eliminating ECU errors and makes alignments and allows functions on ECU
Find all posts by this user
Quote this message in a reply
09-09-2016, 13:21 PM
Post: #4
RE: Fiat Multiecuscan v3.1 Full Registered
Thanks for your answer. Sounds a good program for car mechanics.
I found these cables:
https://nl.aliexpress.com/item/New-Fiat-...4ffbaad98c

But it seems only adapters. Which cable for connection with the laptop is needed herefore?

Greetz
Find all posts by this user
Quote this message in a reply
09-09-2016, 14:41 PM
Post: #5
RE: Fiat Multiecuscan v3.1 Full Registered
(09-09-2016 13:21 PM)ikkuh007 Wrote:  Thanks for your answer. Sounds a good program for car mechanics.
I found these cables:
https://nl.aliexpress.com/item/New-Fiat-...4ffbaad98c

But it seems only adapters. Which cable for connection with the laptop is needed herefore?

Greetz
most used and most economic main interface is called "elm327" is this you have to buy, this interface can mount adapters link you posted.
not buy elm327 version 2.1 does not understand multiecuscan, preferred versions 1.4, 1.5 (does not exist but usually turns out to be 1.4)
Find all posts by this user
Quote this message in a reply
09-09-2016, 14:43 PM
Post: #6
RE: Fiat Multiecuscan v3.1 Full Registered
Thanks. Elm327 1.5 do I have. I though always that elm can only read cars and nog changed things on cars. With the adapters its possible?

Verstuurd vanaf mijn GT-I9505 met Tapatalk
Find all posts by this user
Quote this message in a reply
09-09-2016, 14:56 PM
Post: #7
RE: Fiat Multiecuscan v3.1 Full Registered
(09-09-2016 14:43 PM)ikkuh007 Wrote:  Thanks. Elm327 1.5 do I have. I though always that elm can only read cars and nog changed things on cars. With the adapters its possible?

Verstuurd vanaf mijn GT-I9505 met Tapatalk
elm327 with running engine diagnostics
elm327 + adapters with other diagnostic ECU
other ECU can disable beep seat belts, service reset, DPF regeneration etc. ...
elm327 for use with adapters for other ECU,
usually it makes a change
removing a resistance elm327 chip
Find all posts by this user
Quote this message in a reply
09-09-2016, 19:07 PM
Post: #8
RE: Fiat Multiecuscan v3.1 Full Registered
I hope it is alright... here 3.6


Attached File(s)
Fiat 3.6.txt
File Type: .txt
Downloaded: 224 times
Size: 70 bytes

Reputation: +1 - rkaynak [+1]
Find all posts by this user
Quote this message in a reply
 Thanks given by: rkaynak , bob , javier150 , joe06 , daxxer
09-09-2016, 19:09 PM
Post: #9
RE: Fiat Multiecuscan v3.1 Full Registered
(09-09-2016 14:56 PM)elmer Wrote:  
(09-09-2016 14:43 PM)ikkuh007 Wrote:  Thanks. Elm327 1.5 do I have. I though always that elm can only read cars and nog changed things on cars. With the adapters its possible?

Verstuurd vanaf mijn GT-I9505 met Tapatalk
elm327 with running engine diagnostics
elm327 + adapters with other diagnostic ECU
other ECU can disable beep seat belts, service reset, DPF regeneration etc. ...
elm327 for use with adapters for other ECU,
usually it makes a change
removing a resistance elm327 chip
Maybe I will give it a try. Sounds good and that for more then alone fiat.

Verstuurd vanaf mijn GT-I9505 met Tapatalk
Find all posts by this user
Quote this message in a reply
12-09-2016, 07:08 AM
Post: #10
RE: Fiat Multiecuscan v3.1 Full Registered
(09-09-2016 19:07 PM)loki954 Wrote:  I hope it is alright... here 3.6

I think you have linked to FiatEcuScan 3.6. That version ist older than any MultiEcuScan. After FES (3.6.x?) the software was renamed to MES, starting with v1.0. Now MES 3.2 is latest version.
Find all posts by this user
Quote this message in a reply
Post Reply 


Bookmarks

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  MultiECUSca V 3.7 Full with Patch in odis 12 3,499 18-01-2018 19:21 PM
Last Post: escape82
JFiat Fiat Multiecuscan v2.2 Full Registered in obdstart 21 9,843 17-01-2018 20:14 PM
Last Post: escape82
JFiat Fiat Multiecuscan 3.9R1 + FIX in blokers77 6 1,689 17-01-2018 08:15 AM
Last Post: Griff
  Fiat 500L need original file in maki1 0 89 02-01-2018 14:38 PM
Last Post: maki1
JFiat Fiat blaupunk radio code help in hero3838 2 194 17-12-2017 21:58 PM
Last Post: gryglk
  Multiecuscan 3.9R1 Latest ver. in mikroel 0 1,078 13-12-2017 15:49 PM
Last Post: mikroel
  Fiat Multiecuscan v1.4 Registred free download in obdstart 2 3,826 07-12-2017 16:53 PM
Last Post: allpro
  FIAT DOBLO DCU3f.001 in miloudmess 1 182 29-11-2017 07:57 AM
Last Post: alex68
  Milage cluster dump fiat 500l in flyingdutchy81 2 217 21-11-2017 13:39 PM
Last Post: flyingdutchy81
JFiat Fiat Multiecuscan v3.8 Full Registered in obdstart 10 2,919 13-11-2017 21:20 PM
Last Post: gluck

Forum Jump:


User(s) browsing this thread:
1 Guest(s)

Return to TopReturn to Content