Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ISTA 4.01.21 Standalone - Mega
13-09-2016, 17:48 PM,
Post: #121
RE: ISTA 4.01.21 Standalone - Mega
BMW has officially released 4.01.22 today which is the official release for programming via ISTA.
Reputation: +1 - ruben_17non [+1]
Quote this message in a reply
[+] 16 users say Thank You to dracon for this post
13-09-2016, 23:30 PM,
Post: #122
XZBMW  RE: ISTA 4.01.21 Standalone - Mega
(13-09-2016, 15:43 PM)PhilipM Wrote:  
(12-09-2016, 23:06 PM)Qwerti Wrote:  Hi!

I tested yesterday, and is work fine. Why there are modules, after test on the control unit tree, that they are not built into the car. E.g EGS, DSP, NAV etc.

Sorry my bad english.


ISTA/D has been like this on a few models now, even though it has identified the car as a manual, it will still show unfitted ECUs like EGS in grey.

Green=good
Orange=fault
Red = Should be fitted but no communication
Grey = Possible ECU location in the diagnostic tree
Blue = ECU stuck in programming mode.

Can i switch off this function, like old version (3.47.10)?
Quote this message in a reply
14-09-2016, 02:25 AM,
Post: #123
RE: ISTA 4.01.21 Standalone - Mega
I'm not sure, maybe one of these keys-

Code:
<add key="TesterGUI.EcuTree.ExpertMode" value="false" />
    <add key="TesterGUI.EcuTree.ECUTreeDrawBusLines" value="true" />
    <add key="TesterGUI.EcuTree.ECUTreeShowGridLines" value="false" />
    <add key="TesterGUI.EcuTree.ECUTreeShowCoordEditor" value="false" />
    <add key="TesterGUI.EcuTree.ECUTreeShowDuplicates" value="true" />
    <add key="TesterGUI.EcuTree.ECUShowVirtualBusECU" value="false" />
    <add key="TesterGUI.EcuTree.ECUShowNoneBusECU" value="false" />
Quote this message in a reply
16-09-2016, 15:59 PM, (This post was last modified: 18-04-2017, 14:05 PM by Clusters.)
Post: #124
RE: ISTA 4.01.21 Standalone - Mega
(07-09-2016, 16:10 PM)hulahans Wrote:  Tested it again,ETH still don t work for programming and measurement plan .
...

I was wondering if you can share existing logs in order to help solve this aging issue of ISTA-D programming over ENET. I am doing this as a challenge and want to contribute to the CTUK community if I can.

I have been looking into traces and debugging in real time ISTA and it's getting darn too complex. Having other set of logs would greatly help especially that you have both devices (ENET cable and ICOM).

All that is required is just to connect using each method to the car, run the vehicle test and that's it. No need for a programming session as the error occurs after the vehicle test, during the "read current vehicle context". You can obsfucate any private details like VIN, ... and share the logs. It would be greatly appreciated. Cheers and TIA!

PS: your PM inbox is FULL!
Quote this message in a reply
16-09-2016, 16:42 PM, (This post was last modified: 18-04-2017, 14:05 PM by Clusters.)
Post: #125
RE: ISTA 4.01.21 Standalone - Mega
(16-09-2016, 15:59 PM)aboulfad Wrote:  I was wondering if you can share existing logs in order to help solve this aging issue of ISTA-D programming over ENET. I am doing this as a challenge and want to contribute to the CTUK community if I can.

I have been looking into traces and debugging in real time ISTA and it's getting darn too complex. Having other set of logs would greatly help especially that you have both devices (ENET cable and ICOM).

All that is required is just to connect using each method to the car, run the vehicle test and that's it. No need for a programming session as the error occurs after the vehicle test, during the "read current vehicle context". You can obsfucate any private details like VIN, ... and share the logs. It would be greatly appreciated. Cheers and TIA!

PS: your PM inbox is FULL!

Would be great for those as you and me that only have ENET capabilities...
Perhaps, BB88 could you give some tips because i'm sure he already have this working clapping
Quote this message in a reply
16-09-2016, 18:04 PM,
Post: #126
RE: ISTA 4.01.21 Standalone - Mega
(16-09-2016, 16:42 PM)botho Wrote:  ...
Would be great for those as you and me that only have ENET capabilities...
Perhaps, BB88 could you give some tips because i'm sure he already have this working clapping

Actually, I mostly use Esys for my flashing needs. I have tough taken this as a challenge and I know some people would like to use ISTA-D for programming instead of Esys.

Bb88 said he didn't look into it in detail, but just in case he's reading, I made it to Tresult CallFunction(), and the socket error is thrown by the silly java psdz-api.j4n.jar , as to why, it is still a mystery. (I can't stand java...)

Code:
16-09-16 10:33:22,308 [Thread-16] [WARN] [] com.bmw.psdz.vehicle.base.topology.access.EthernetAccessLinkImpl: connection test failed. Attempt 1 of 3
java.net.ConnectException: Connection refused: connect�
Quote this message in a reply
[+] 2 users say Thank You to aboulfad for this post
17-09-2016, 02:34 AM,
Post: #127
RE: ISTA 4.01.21 Standalone - Mega
Link seems to be broken. Here is a reupload if anyone is interested.


Attached Files
Rheingold Standalone v4.01.21.txt
File Type: .txt
Downloaded: 80 times
Size: 70 bytes


Please, Press the Buttons [Image: postbit_thx.gif] and [Image: postbit_reputation.gif] if you feel that this post helped you!

Reputation: +2 - ruben_17non [+1] , bmw325.d [+1]
Quote this message in a reply
[+] 6 users say Thank You to Loliceman for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,648 627,370 2 minutes ago
Last Post: Sedoy
  ista for use whit vcx se db8000 0 22 2 hours ago
Last Post: db8000
  ista 4.46 Standalone kiranabc 31 2,843 3 hours ago
Last Post: kiranabc
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 287 7 hours ago
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,284 Yesterday, 20:02 PM
Last Post: Node
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,437 Yesterday, 10:39 AM
Last Post: MINIGP1610
XZBMW |ON MEGA| /// ALL ROAD MAPS EUROPE -> 2024 NEW + *KEY-TOOLS* hashtagmaster 206 65,962 Yesterday, 08:22 AM
Last Post: hashtagmaster
  [MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 102 34,745 Yesterday, 05:59 AM
Last Post: hashtagmaster
XZBMW PSdZData 4.46.31 Full (MEGA) charlesjyw 0 118 26-03-2024, 18:07 PM
Last Post: charlesjyw
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 122 26-03-2024, 12:09 PM
Last Post: hlip

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content