[beemerboy88]

Standalone diagnosis works quite good, but i can not make measurement Plan.

Everytime Ista says i have to test the car first, and i have done that several times.
Before i copied complete psdzdata folder from ista p 59.4 to C:\Rheingold\PSdZ\data

Dont know whats wrong, but i only tested with ETH (ignition voltage was not shown ) not with my icom next.
Any ideas?

I'm not sure but in the last versions I had the same Problem with ETH cable. Everything works when I use an ICOM. Try it with your ICOM Next.

I have tested now again with icom next, diagnosis works but programming same result as with eth. I have to test the car first, although i did that several times.
Someone have another idea?

psdzdata in ista 4.01.21 is 62GB vs 60GB for ISTA/P. But probably not the cause of the problems you are having.