Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
How to program with ISTA-D 4.01.21
07-09-2016, 11:54 AM,
Post: #1
|
|||
|
|||
How to program with ISTA-D 4.01.21
Where should the BMW_ISPI_ISTA-SDP_FULL_4.01.15 be placed, and i want to know if progamming works?
and what is the Path in istagui exe config <!-- Enable Programming --> <add key="BMW.Rheingold.Programming.Enabled" value="true" /> <add key="BMW.Rheingold.Programming.ExpertMode" value="true" /> <add key="BMW.Rheingold.Programming.PsdzDataPath" value="???? |
|||
07-09-2016, 22:42 PM,
Post: #2
|
|||
|
|||
RE: How to program with ISTA-D 4.01.21
(07-09-2016, 11:54 AM)snypertje Wrote: Where should the BMW_ISPI_ISTA-SDP_FULL_4.01.15 be placed, and i want to know if progamming works? %:\Rheingold\PSdZ\data\psdzdata |
|||
08-09-2016, 15:09 PM,
Post: #3
|
|||
|
|||
RE: How to program with ISTA-D 4.01.21
Is this permeant thing ? We can still use ISTA/p for F series to program right or is ISTA/d going to be the new solution?
|
|||
08-09-2016, 15:37 PM,
Post: #4
|
|||
|
|||
RE: How to program with ISTA-D 4.01.21
ISTA/P will still flash F, G and I series vehicles until 07/2017 according to BMW.
But eventually ISTA/P for F, G, and I series will be phased out and only be around to support legacy E-series flashing. |
|||
09-09-2016, 12:26 PM,
Post: #5
|
|||
|
|||
RE: How to program with ISTA-D 4.01.21
(08-09-2016, 15:37 PM)snypertje Wrote: ISTA/P will still flash F, G and I series vehicles until 07/2017 according to BMW. Ok cool thanks so then it will be all in one with ista/d Im assuming esys flashing will stay the same? |
|||
09-09-2016, 13:17 PM,
Post: #6
|
|||
|
|||
RE: How to program with ISTA-D 4.01.21
|
|||
09-09-2016, 14:04 PM,
Post: #7
|
|||
|
|||
RE: How to program with ISTA-D 4.01.21
(09-09-2016, 13:17 PM)PhilipM Wrote: Has anyone managed to get ISTA/D to program or code? Yes, no programming without power supply on the car (14v) and on the laptop too. |
|||
09-09-2016, 16:32 PM,
Post: #8
|
|||
|
|||
RE: How to program with ISTA-D 4.01.21
(09-09-2016, 13:17 PM)PhilipM Wrote: Has anyone managed to get ISTA/D to program or code? You do not want to risk corrupting vehicle by loosing power on notebook or car. You must have PSU for vehicle and power adapter for computer. |
|||
20-09-2016, 15:28 PM,
Post: #9
|
|||
|
|||
RE: How to program with ISTA-D 4.01.21
(07-09-2016, 22:42 PM)Almaretto Wrote:For ICOM only?(07-09-2016, 11:54 AM)snypertje Wrote: Where should the BMW_ISPI_ISTA-SDP_FULL_4.01.15 be placed, and i want to know if progamming works? |
|||
20-09-2016, 20:54 PM,
Post: #10
|
|||
|
|||
RE: How to program with ISTA-D 4.01.21
From here- http://cartechnology.co.uk/showthread.php?tid=18255
"Edit: I think these two lines need to be deleted from the ISTAGUI.exe.config file: <add key="BMW.Rheingold.Programming.Enabled" value="true" /> <add key="BMW.Rheingold.Programming.PsdzDataPath" value="c:\esysdata\psdzdata"/> " So, has the programming data moved from the PSDZ Data? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content