Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Swap colour cluster to 3d colour
07-09-2016, 13:06 PM,
Post: #1
|
|||
|
|||
Swap colour cluster to 3d colour
Hello
I have a Tiguan 2011 with color cluster. I want to change it with 3D colour. Must I go to vw dealer to adapt the immo? or can I do it my self? The tool I have is: I can read/write the eprom chipset inside the cluster 24c64 I have odis and vcds I know that the immo section is somewhere but I don't know. If I read my old eeprom and write it down to the 3D cluster will the car start? thanx |
|||
07-09-2016, 16:00 PM,
Post: #2
|
|||
|
|||
RE: Swap colour cluster to 3d colour
You can't copy the contents of the eeprom, its encrypted.
At this moment the only solution is to go to the dealer. |
|||
07-09-2016, 21:44 PM,
Post: #3
|
|||
|
|||
RE: Swap colour cluster to 3d colour
Its depend which Software is on the Cluster?some Softwareversions Are possible with vvdi 2
|
|||
29-08-2017, 11:56 AM,
Post: #4
|
|||
|
|||
RE: Swap colour cluster to 3d colour
I can copy on all of them
|
|||
29-08-2017, 20:38 PM,
Post: #5
|
|||
|
|||
RE: Swap colour cluster to 3d colour
Sw 0703 is possible with vvdi or smok, uhds and org. VAG Tacho. All other also possible but there is no public tool at this time
|
|||
29-08-2017, 22:05 PM,
Post: #6
|
|||
|
|||
RE: Swap colour cluster to 3d colour
It is neccassary to modify the nec with other Firmware and than it's also possible to adapt this Kind of sw versions..
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content