[ROD-BENDERS]

Here you will find the Mercedes Benz Specific DTC Tables, with tips.

you may find these useful when working on MB vehicles, especially, if you work with MB ecu files away from the car.

[CATAHA]

Also from my dealing with Mercedes in DAS software:

Let's take an example of a misfires for cylinder number 3
Code would show as following steps
P0303-001
P0303-002
P0303-003
P0303-004
P0303-005
P0303-006

One just need to read the step(i don't remember EXACTLY off top of my head) but it would be something like this
P0303-001 (Spark Plug)
P0303-002 (Spark Plug Wire)
P0303-003 (Spark Plug Coil)
P0303-004 (Compression)
P0303-005 (Injector)
P0303-006 (Fuel Pressure)
Etc.....


and with new codes in Xentry it's been directly copied from VAG-Group with 65,xxxx Codes to be more exact where and what to find.....

The new Gen Trouble codes something like a 2+++ Million numbers of codes
(GOOD LUCK TO NEW GENERATION AUTOMOTIVE EXPERTS IN FUTURE)

[ROD-BENDERS]

Also from my dealing with Mercedes in DAS software:

Let's take an example of a misfires for cylinder number 3
Code would show as following steps
P0303-001
P0303-002
P0303-003
P0303-004
P0303-005
P0303-006

One just need to read the step(i don't remember EXACTLY off top of my head) but it would be something like this
P0303-001 (Spark Plug)
P0303-002 (Spark Plug Wire)
P0303-003 (Spark Plug Coil)
P0303-004 (Compression)
P0303-005 (Injector)
P0303-006 (Fuel Pressure)
Etc.....


and with new codes in Xentry it's been directly copied from VAG-Group with 65,xxxx Codes to be more exact where and what to find.....

The new Gen Trouble codes something like a 2+++ Million numbers of codes
(GOOD LUCK TO NEW GENERATION AUTOMOTIVE EXPERTS IN FUTURE)

Cataha, feel free to add a better list for download, I am sure it would be very useful to the forum and members who work on files

[CATAHA]

Cataha, feel free to add a better list for download, it would be very useful to the forum

You know how many times i tried making a BLACK NOTE BOOK for myself on codes that i dealt with......... at the end of day i just deal with them....
It could be just me or it could be otherwise i don't know.

Before i would say oh just replace this and you are done... but after seen more and more of..... i can tell you this TEST TEST TEST EVERY Component until problem is found.
Example this week i worked on 2008 Audi A8L 4.2 FSI. car showed as misfire on cylinder 2,3 but in reality it was cylinder 5,6 that had a bad (brand new) spark plugs "how would one justify this???, when you have a code p0302&&p0303, oh yeah start looking at cylinder 5,6 because for those cylinders codes are p0305&&p0306, i DO NOT KNOW!!!"
Here is another one, I worked this Friday on w203 both front power seats would not work.... it was wrongly coded Front-SAM and Ignition Module by SOMEBODY!!!
Here is another one i worked on this week w204 because of passenger occupancy seat sensor faulty both rear windows would open randomly by it self with NO fault codes..
There is alot more that i have seen it of similar or alike!
So how should i put this??? people wouldn't understand it moreover people would think I'm a crazy

and i'm not trying to criticize you for putting out those codes, i'm just say this "TEST TEST TEST EVERY COMPONENT BEFORE SAYING THAT IS THE PROBLEM"