[Pasi_K]

I bought Renault Clip interface but i cant get it work. Here is same blue PCB which is in my interface



I tried install v145 and v160. V145 in Windows 7 32bit ad V160 in Windows XP 32bit SP3. I can install and activate clip but then there is problem.

Only one "generic usb host" appear to device manager when i put usb cable to pc. Supposed be 1B-Alliance Vehicle Communication Interface????

If clip is connected to car and i put usb to pc then i see also one CAN and one ISO device in device manager. It supposed show four (Two CAN and two ISO)???? Also green leds lights up for a while.

V145 Clip tries update firmware and stuck in 20%. V160 doest find interface at all.

Can somebody help? What this pcb supposed show in device manager and which is "right" clip software version for this?

[Pasi_K]

I tried install v115 to xp. Now when i connect interface to pc it is installing four drivers. Clip show that rlt2002 is interface type but then its stuck in updating firmware 20%. When installing one of four drivers windows goin bluescreen and there is something about bad_pool_caller. Do i have wrong drivers? I used those that came with v145 cd.