[ReitiRight]

Hello,
I have a 2016 F20 120d with Business Navigation (EntryNav).

I'm unable to read FSC to generate a new one.

I tried with E-Sys and with SWID reader (1B) v1.2.

Is there any other solution to read the FSC on new navi?

I thank you in advance for any help!

[mall]

For this you need SWID reader DE and ICOM

[ReitiRight]

On other cars i not needed ICOM!

I try it later with the DE version and give response about the success.

[ir0n87]

For entrynav u have to read DE and use ENET (also ICOM is OK).
U can read via SWID reader or also trought esys expert FSC mode.

Bye

[patrutalex]

Cable enet and software bmwaicoder

[shawnsheridan]

You are wasting your time. ENTRYNAV uses a DF Nav Enabler file, and FSC Generator only works with 1B and DE Nav Enabler files, so FSC Code from DF is wrong Code. You cannot use FSC Generator for ROUTE FSC Code.

[ReitiRight]

Thanks Shawn.

Which tool should I then use to read the correct file?

[shawnsheridan]

Thanks Shawn.

Which tool should I then use to read the correct file?

There is none. You cannot generate a ROUTE or EVO FSC Code.