Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
2007 BMW X3 Transfer case calibration faulty
22-09-2016, 01:38 AM,
Post: #1
|
|||
|
|||
2007 BMW X3 Transfer case calibration faulty
I have 2007 BMW X3
it came with DSC and some other light on, related to VTG actuator I had Transfer Case Actuator Motor Replacement Gear and i changed that.The old gear was worn out ,calibration went ok after few km of driving error came back see attachment The vehicle jerks especially when cornering , i had extra used actuator with new gear already replaced and again calibration goes ok but, after some driving the error comes back. also oil change was done with OEM oil does that mean this car needs transfer case ? |
|||
22-09-2016, 04:45 AM,
Post: #2
|
|||
|
|||
RE: 2007 BMW X3 Transfer case calibration faulty
The error is calibration faulty!
Put a good power charger and calibrate again. |
|||
22-09-2016, 12:49 PM,
Post: #3
|
|||
|
|||
RE: 2007 BMW X3 Transfer case calibration faulty
I would also suspect the replacement gears not being very high quality. I prefer to use the original gear by turning it 180 degree.
|
|||
23-09-2016, 01:14 AM,
Post: #4
|
|||
|
|||
RE: 2007 BMW X3 Transfer case calibration faulty
Did that
When I'm doing calibration it goes ok even i try few times and always ISTA says process complete successfully but after some driving, code coming back |
|||
03-10-2016, 04:17 AM,
Post: #5
|
|||
|
|||
RE: 2007 BMW X3 Transfer case calibration faulty
Dear koziol,
is the following path correct? Service function --> Power Train ---> Transmission control unit VTG --> Repair? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content