[dexters84]

Hi

I'm looking for us spec cafd files for acsm ecu.
My current I-Level is 59.4, car was originally US spec.
I've upgraded my istep with ista and now I have airbag errors.
I believe this is due to the fact that my car was set to ece region previously and ista coded ACSM accordingly.

Can anyone share their cafd files for this integration level so I can compare with what I have now?

I have backup of my old cafd files but the names are different and it was an older I-level.

[Breach]

Are you sure that the errors are because of missing CAFDs? If so, can't really help out since my ACSM is ECE, but I am asking since normally after ACSM flash you'd need to lock the airbags running the procedure from ISTA+ or e-Sys (transmitter).

[Almaretto]

You will run into issues with difference between US and ECE airbags as well as need to lock airbag after programming ACSM module.

But, you can always use E-sys Coding-Verification to generate NCD's that are specific to a given vehicle. This is good site if you need Typschussel.