Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
NBT EVO retrofit in Eseries - Solved
|
13-05-2017, 11:03 AM,
Post: #51
|
|||
|
|||
|
NBT EVO retrofit in Eseries - Solved
I know i have from bimmerretrofil and is not compatible . Where i can buy altermarket cam compatible ?
Wysłane z iPhone za pomocą Tapatalk Did I helped you?
Than please, give me Reputation and Thanks. EntryNav2 - Custom FSC SET for any VIN - Patch REMOTE EntryNav2 - Component Protection remove REMOTE EntryNav2 - Carplay with ATM or withOUT REMOTE 8HP - Clear ISN Remote BMW FSC Repair packs | FSC map codes (normal / Lifetime) Full FSC Set + CarPlay Fullscreen - NBT EVO ID5/6(any software version) EVO iDrive 4 to iDrive 6 FLASH including CarPlay Fullscreen EVO Bootloader FIX / HW4.1 BTLD FIX / VO FIX / REGION CHANGE / BLACK SCREEN FIX / CLEAR V850 KAFAS 2/4 SLI / MGU REGION CHANGE / CARPLAY KAFAS4 Virgin |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
13-05-2017, 17:04 PM,
Post: #52
|
|||
|
|||
|
RE: NBT EVO retrofit in Eseries - Solved
Does anybody have the recent firmware file of custom retrofit . ro ENBT adapter, this version will fix the shut off from emulator after starting car, i try several times to contact adrian from custom retrofit garage but i not getting any answers.
the version needs to be newer than the V220 Sombody have this firmware and can share it, its a .cod file |
|||
|
|
|
13-05-2017, 20:47 PM,
Post: #53
|
|||
|
|||
RE: NBT EVO retrofit in Eseries - Solved
(11-05-2017, 15:11 PM)pshoey Wrote: I just installed amp (6823464) and although the amp sounds better than the top hifi one I had before, phone caller still hears echo. Mic coding was fine. Fixed, finally. Enabled REFERENCE_CHANNEL_TEL and set REFERENCE_CHANNEL_TEL_MODE to wert_01 Email: [email protected] Skype: [email protected]
HU Engineering Tool MGU Engineering Tool - now with field update mode via Feature Installer. Coding 2.0 |
|||
|
|
|
16-05-2017, 04:35 AM,
Post: #54
|
|||
|
|||
RE: NBT EVO retrofit in Eseries - Solved
(13-05-2017, 20:47 PM)pshoey Wrote:(11-05-2017, 15:11 PM)pshoey Wrote: I just installed amp (6823464) and although the amp sounds better than the top hifi one I had before, phone caller still hears echo. Hi, This solution is valid only for the HU_NBT In no case does it work with NBT EVO A subject already touched on several times, the only solution is to put an harman kardon F series |
|||
|
|
|
16-05-2017, 13:28 PM,
(This post was last modified: 16-05-2017, 13:29 PM by pshoey.)
Post: #55
|
|||
|
|||
|
RE: NBT EVO retrofit in Eseries - Solved
I do have EVO and I have put an F-series HK amp in my E series, but I still had echo heard by the phone caller.
After coding the REFERENCE_* settings above, the callers no longer hear echo. Email: [email protected] Skype: [email protected]
HU Engineering Tool MGU Engineering Tool - now with field update mode via Feature Installer. Coding 2.0 |
|||
|
|
|
16-05-2017, 14:41 PM,
Post: #56
|
|||
|
|||
|
RE: NBT EVO retrofit in Eseries - Solved
Yes but you have a F series amp, with an E series amp, it has no impact.
I have an individual high end for E series, no coding does solve this problem. But then I'm glad to know that the reference channel parameter remains necessary Thank you |
|||
|
|
|
02-06-2017, 20:17 PM,
Post: #57
|
|||
|
|||
|
RE: NBT EVO retrofit in Eseries - Solved
Any news for us with E series lci indi.high end amplifier?My amp and EVO have last software version (03/2017) but still have ECHO!!
|
|||
|
|
|
02-06-2017, 23:10 PM,
Post: #58
|
|||
|
|||
|
RE: NBT EVO retrofit in Eseries - Solved
The E series individual high-end amp does not solve the echo worry, even some F series Lear amp do not allow
|
|||
|
|
|
05-06-2017, 20:33 PM,
Post: #59
|
|||
|
|||
|
RE: NBT EVO retrofit in Eseries - Solved
What`s need to be done to get the F AMP work in E?
CIC Coding Individual Menue Step One What`s next? AMP get`s 12V and GND MOST etc. |
|||
|
|
|
05-06-2017, 22:26 PM,
Post: #60
|
|||
|
|||
|
RE: NBT EVO retrofit in Eseries - Solved
Just plugged in on my 2008 E92 M3 - minor coding and voila!
Email: [email protected] Skype: [email protected]
HU Engineering Tool MGU Engineering Tool - now with field update mode via Feature Installer. Coding 2.0 |
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
|
G21 paddles retrofit | bm92 | 2 | 91 |
Yesterday, 06:32 AM Last Post: Node |
| Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,481 |
26-04-2024, 08:06 AM Last Post: smilo |
|
| Kafas issue aftrer ACC Retrofit | It3_Magic | 14 | 636 |
23-04-2024, 07:44 AM Last Post: It3_Magic |
|
| G82 rear tail lights CSL retrofit | Sauron | 10 | 803 |
20-04-2024, 07:35 AM Last Post: SANYA |
|
|
|
BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS | intel123 | 891 | 468,225 |
20-04-2024, 01:05 AM Last Post: fe7565 |
|
|
Neck warmer retrofit | Just2fast5 | 5 | 399 |
17-04-2024, 11:20 AM Last Post: Spirit5676 |
| ID4 evo to ID6 Evo full retrofit, ATM issues 03178A | mitch32 | 1 | 200 |
15-04-2024, 17:52 PM Last Post: mitch32 |
|
|
|
BMW E84 Cruise control retrofit not workig | Alyn546 | 4 | 228 |
12-04-2024, 14:23 PM Last Post: DieStream |
| F10 FLA retrofit | beng2k | 30 | 1,063 |
11-04-2024, 18:43 PM Last Post: beng2k |
|
|
|
BMW f20 KOMBI2 retrofit | bm92 | 15 | 530 |
10-04-2024, 07:51 AM Last Post: bm92 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
