[zeronoo]

Hey friends got e60 with error 964c which sounds like that:
TMFA:open circuit, firing circuit , thorax airbag , driver
I find out that one of 3 firing circuit got to low OHM , i want put now resistor but dont know which wire can anybody help me?

well...open circuit means no connection and low ohm means short circuit...so...you need to clarify this first, because if open circuit then you can code out that circuit and all will be ok, but if short circuit...you need to resolve this - no matter coding, if short circuit detected, you will have airbag error...so figure out the real problem first

BR, z9

[Silva1337]

Just help me find correct wire as i writen one of 3 got only 0.8 ohm when needed is 2

[Silva1337]

Bumping bumping

[zeronoo]

TMFA pin 4 (connector 1128 / 4 pins + FO)/ Red -> pin 1 Thorax airbag
TMFA pin 5 (connector 1128 / 4 pins + FO)/ Blue-Red -> pin 2 Thorax airbag

[Silva1337]

Where is the module located where to search sorry for stuppid question realoem not shows

[zeronoo]

Door, just remove door panel

[Czozen]

If you have 0.8Ohm you have damaged Plug.
You can:
- Remove small metal piece witch contact pins inside of airbag socket.
- Change airbag plug (there must be long plastic pins witch contact this metal i mentioned upper)