Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Mercedes RS232 to RS485 cable question
19-10-2016, 02:59 AM,
Post: #1
|
|||
|
|||
Mercedes RS232 to RS485 cable question
So i'm trying to help somebody else and i'm a bit of a confused here
This somebody has original C3 with an OLD IBM laptop Windows NT4.0, connected to dock I got him D6XX laptop , so here is a question there is 2 types of cable and i'm not sure which one should i get Type 1 Or Type 2 have somebody done does upgrades? If any of my posts or current one helps then don't forget to press thanks and add a reputation
|
|||
19-10-2016, 03:41 AM,
Post: #2
|
|||
|
|||
RE: Mercedes RS232 to RS485 cable question
Same cable,on picture china box emty
check from- http://www.mbstartool.com/wholesale/rs23...ar-c3.html |
|||
19-10-2016, 20:45 PM,
Post: #3
|
|||
|
|||
RE: Mercedes RS232 to RS485 cable question
(19-10-2016, 02:59 AM)CATAHA Wrote: So i'm trying to help somebody else and i'm a bit of a confused here Cable type 1 is the original c3 years until 2009, after the used cable type 2. I have a 2008 original C3 and the cable is type 1, while my friend has a 2010 and uses cable C3 type 2 |
|||
Reputation: +1 - kikis [+1] | |||
19-10-2016, 21:06 PM,
Post: #4
|
|||
|
|||
RE: Mercedes RS232 to RS485 cable question
(19-10-2016, 20:45 PM)maxeugen1 Wrote:(19-10-2016, 02:59 AM)CATAHA Wrote: So i'm trying to help somebody else and i'm a bit of a confused here so they both work have you tried swapping them? to see what happens? If any of my posts or current one helps then don't forget to press thanks and add a reputation
|
|||
19-10-2016, 21:33 PM,
Post: #5
|
|||
|
|||
RE: Mercedes RS232 to RS485 cable question
And 2 are all equal ... I opened my today that the black box has a Viretto cable there is no card inside, or form ... does not change anything !!
Cable 1 and 2 = twins |
|||
19-10-2016, 21:50 PM,
Post: #6
|
|||
|
|||
RE: Mercedes RS232 to RS485 cable question
(19-10-2016, 21:33 PM)ombra Wrote: And 2 are all equal ... I opened my today that the black box has a Viretto cable there is no card inside, or form ... does not change anything !! The original c3 Mux can not reverse the cables does not work. Daxxer posted two pictures here where Mux are two original C3. In the first picture is a Mux which is used cable type 1 and in the second picture is a newer generation Mux with cable type 2. http://cartechnology.co.uk/showthread.php?tid=5149 Ombra you somehow have a Mux clone? when possible |
|||
Reputation: +1 - kikis [+1] | |||
19-10-2016, 21:55 PM,
Post: #7
|
|||
|
|||
RE: Mercedes RS232 to RS485 cable question
I have both the gold version that the clone is c3 c5 is I can tell you that the 2 posted cables catha are equal ...
Black Box= empty |
|||
19-10-2016, 21:58 PM,
(This post was last modified: 19-10-2016, 22:04 PM by CATAHA.)
Post: #8
|
|||
|
|||
RE: Mercedes RS232 to RS485 cable question
(19-10-2016, 21:55 PM)ombra Wrote: I have both the gold version that the clone is c3 c5 is I can tell you that the 2 posted cables catha are equal ... in couple of hours i'll stop by a shop that has fake c3 and test his cable(s) type 2 on original c3 and see what will happen if any... moreover report back if type 2 has worked or not on original c3 (19-10-2016, 21:55 PM)ombra Wrote: I have both the gold version that the clone is c3 c5 is I can tell you that the 2 posted cables catha are equal ...Off topic... What is a gold version c3 ??? If any of my posts or current one helps then don't forget to press thanks and add a reputation
|
|||
20-10-2016, 02:13 AM,
Post: #9
|
|||
|
|||
RE: Mercedes RS232 to RS485 cable question
So i tried it with type 2 and it worked flawlessly on w211
Thanks to all participating members of this forum/community If any of my posts or current one helps then don't forget to press thanks and add a reputation
|
|||
08-02-2017, 08:22 AM,
Post: #10
|
|||
|
|||
RE: Mercedes RS232 to RS485 cable question
Hi there,
I need help with the pin out for the cable without a box inorder for me to e able to fix it. Checked for continuity on and it appears I have to replace the cable or cut it shrt as such I will need for bot ends (the Com port female and the other side) Thanking you in advannce. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content