Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW E60 CIC crash/brick
30-10-2016, 14:07 PM,
Post: #1
|
|||
|
|||
BMW E60 CIC crash/brick
Hello everybody,
I flashed a BMW e60 with CIC last weekend. (Software ISTA-P). The ISTA-P aborted the flash process for CIC-BO (general error) Now the CIC-BO (CICR) has the status 12 in Tool32. I already to tried to reflash with ISTA-P ... the message say: please replace CIC and the CIC-BO has no partnumber / ZUSB (Message: please enter partnumber) How can the CIC now reflash? I used ICOM with Most. (its not the first time that i flash bmw) Can someone help me please? greetings Knowme2k |
|||
30-10-2016, 17:02 PM,
Post: #2
|
|||
|
|||
RE: BMW E60 CIC crash/brick
Try with winkfp?
|
|||
30-10-2016, 18:28 PM,
Post: #3
|
|||
|
|||
RE: BMW E60 CIC crash/brick
|
|||
30-10-2016, 18:44 PM,
Post: #4
|
|||
|
|||
RE: BMW E60 CIC crash/brick
Thought about recovery cds but they are for ccc..since u have cic idk
after little googling found this..same issue and guy recovered it with winkfp expert mode.its possible .hope it helps |