Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ISTA-P Vehicle Order Problem
04-11-2016, 14:03 PM,
Post: #1
XZBMW  ISTA-P Vehicle Order Problem
Hi everybody, when I want to use ista-p it want Vehicle Order. How can I generate this file ? I'm sorry for my bad English sad
Quote this message in a reply
04-11-2016, 14:19 PM,
Post: #2
RE: ISTA-P Vehicle Order Problem
It depends on you model, F-series or E-Series.

I had an issue a few days ago when I was helping a friend. He had an E60 and ISTA/P gave warnings for "faulty VO" or "cannot read VO from vehicle".

I had to use NCSExpert and remove some old and faulty VO codes that was stored in car before i could use ISTA/P.

Please, Press the Buttons [Image: postbit_thx.gif] and [Image: postbit_reputation.gif] if you feel that this post helped you!

Quote this message in a reply
[+] 2 users say Thank You to Loliceman for this post
04-11-2016, 16:31 PM,
Post: #3
RE: ISTA-P Vehicle Order Problem
Same with me on friend e92, someone plays before and randomly add some VO, with NCS I have to remove them, than it works like a charm.
Quote this message in a reply
[+] 2 users say Thank You to jararak for this post
04-11-2016, 17:29 PM,
Post: #4
RE: ISTA-P Vehicle Order Problem
Yes previous owner should learn to code properly smile

Please, Press the Buttons [Image: postbit_thx.gif] and [Image: postbit_reputation.gif] if you feel that this post helped you!

Quote this message in a reply
[+] 2 users say Thank You to Loliceman for this post
04-11-2016, 19:17 PM,
Post: #5
RE: ISTA-P Vehicle Order Problem
How can I found original VO ? in F and E series ? or correct the wrong VO Thank you smile
Quote this message in a reply
04-11-2016, 19:25 PM,
Post: #6
RE: ISTA-P Vehicle Order Problem
(04-11-2016, 19:17 PM)semihmutcali Wrote:  How can I found original VO ? in F and E series ? or correct the wrong VO Thank you smile

Run VIN Check. You can correct VO in either Notepad++, Word Pad, or E-sys FA-Editor for F-series. Not sure about E-series.


Quote this message in a reply
04-11-2016, 23:08 PM,
Post: #7
RE: ISTA-P Vehicle Order Problem
Just decode vin in ETK Login to ASAP,
  There you have all the codes FA
You can even explicitly load FA (E-series NCS) file SSD and save in two communication modules

If my post helped you hit the thanks and reputation button!under
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Bmw G31 retrofit Mgu id7 atm problem intranet 14 1,701 Less than 1 minute ago
Last Post: evaldazj
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,618 619,604 24 minutes ago
Last Post: wawan.ru
  Problem Retrofit electrified steering column on the G31 LCI smercki 5 117 34 minutes ago
Last Post: smercki
XZBMW BMW Vehicle Order (VO) BMWholic 146 46,668 1 hour ago
Last Post: MODISA
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 7 217 1 hour ago
Last Post: rocdeng
XZBMW X5 G05 with MGU and ATM: GPS problem david357 6 603 1 hour ago
Last Post: david357
  REQUEST ista 4.45.21 the ISTAGUI.exe file ddsx 4 163 11 hours ago
Last Post: r3mast3r
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 58 5,353 Yesterday, 19:43 PM
Last Post: NeRkO20
  ista 4.46 Standalone kiranabc 5 817 Yesterday, 17:47 PM
Last Post: bmwlover
XZBMW Ultimate Ediabas/ISTA+ voltage control V3 Node 320 120,457 17-03-2024, 20:59 PM
Last Post: Red_bean_bun

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content