[shintake]

Tried to flash fem gw, but it ended with exception

Code:

Read SVT before TAL execution started.

TAL execution started.
ExecutionID=2016/11/15-20:54:21.936
[FEM_GW - 10] - [Exception - FEM_GW - 10] SVK-Ist does not match expected SGBMIDs for ecu ECUId:FEM_GW_0x10. Excpected (relevant process classes only): [hwap_00000f3d-255_255_255, hwap_00000f3b-255_255_255, hwel_00000792-000_005_002, hwap_00000f38-255_255_255, hwap_00000f3a-255_255_255], Actual (relevant process classes only): [hwel_00000792-000_004_003, hwap_00000f3a-255_255_255, hwap_00000f38-255_255_255, hwap_00000f3d-255_255_255, hwap_00000f3b-255_255_255], Missing SGBMID(s): [hwel_00000792-000_005_002], Surplus SGBMID(s): [hwel_00000792-000_004_003]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "55s". [C206]

Read SVT after TAL execution started.
Read SVT after TAL execution finished.

I've entered i-level plant F020-12-07-500 and latest F020-16-11-502 which is selected I suppose based on my psdzdata.

wrong I level shipment you need the one that macth HW id

[lynxbmw]

Problem solved.
FEM GW was flashed by hand by @shintake, then I ran diagnostic and there were lot of errors almost everything was not working, but there was KL15.
I corrected the plant i-level and flashed FEM with ISTAP, then all problems were solved.