Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
FRM dead
02-05-2018, 12:01 PM,
Post: #1
|
|||
|
|||
FRM dead
Can somebody help to rescue a dead FRM3... I have xprog 5.0.... So i can read the eprom, which file do you need to restore the eprom?
This is the partnumber: 61359224592 e87 Basis Thanks in advance |
|||
02-05-2018, 12:32 PM,
Post: #2
|
|||
|
|||
RE: FRM dead
You need to read the D-Flash, then Convert the D-Flash to Eeprom, write the newly created Eeprom to the FRM3.
If you need Good Eeprom Dump, i have one with the same part number, but then you have to recode it with NCS |
|||
02-05-2018, 14:36 PM,
Post: #3
|
|||
|
|||
RE: FRM dead
(02-05-2018, 12:32 PM)blax123 Wrote: You need to read the D-Flash, then Convert the D-Flash to Eeprom, write the newly created Eeprom to the FRM3. Reading d-flash is no problem, but how do you convert ? |
|||
02-05-2018, 14:36 PM,
Post: #4
|
|||
|
|||
RE: FRM dead
post d-flash and someone will do it
|
|||
02-05-2018, 18:06 PM,
Post: #5
|
|||
|
|||
RE: FRM dead
I can do it for you team viewer
|
|||
02-05-2018, 18:59 PM,
Post: #6
|
|||
|
|||
RE: FRM dead
software for extract eee...
|