Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. Martech

  2. ATM - Balkan

    atm balkan file service
  3. Porsche piwis

  4. MOD FILES

  5. ProCarDiag

  6. ECU CHIPS



Post Reply 
BMW Omitec cable
20-11-2016, 22:34 PM
Post: #1
BMW Omitec cable
Hi everyone. I happened across an original BMW OMITEC USB cable, and I can hardly find any documentation about it. It works very well, and is extremely well built and robust. Very easy to carry around instead of the larger ICOM.

I have more specific questions if it can work with older L-Line modules ('ADS' modules) with a 20-pin adapter?
I have looked through the official documentation, and see that the OMITEC 'Desktop" has L-Line on pin 15 of the interface parallel port, but wanted to know if the OMITEC USB needs an adapter, or what kind of wiring to communicate to L-Line, if possible.

The OMITEC USB and OMITEC "Desktop" uses the same drivers, firmware, and communication settings.

If anyone knows more, I appreciate any answers.


Attached File(s)
InstructionforOMITECInstallation.pdf
File Type: .pdf
Downloaded: 92 times
Size: 343.68 KB

omitec_doku.pdf
File Type: .pdf
Downloaded: 79 times
Size: 803.78 KB

Find all posts by this user
Quote this message in a reply
 Thanks given by: 4433modic , DNK76
21-11-2016, 01:23 AM
Post: #2
RE: BMW Omitec cable
Whats the difference from K+DCan?

bikerdriveenjoy
Find all posts by this user
Quote this message in a reply
21-11-2016, 02:49 AM
Post: #3
RE: BMW Omitec cable
Well it doesn't look like any K+DCAN I've ever seen.
It is powered by +12V vehicle power, not USB port...



   
Heavy duty machined body


   
gold plated spring pins, in a machined body


   
Infineon Processor?, FTDI FT245BM


   
The opposite outer side


   
Some other documentation, AM29F400BB memory


   
Version history, capabilities



It is approved to Diagnose, Code, Flash any BMW up to date (AFAIK).
Find all posts by this user
Quote this message in a reply
 Thanks given by: Levanime , 4433modic
22-11-2016, 07:54 AM
Post: #4
RE: BMW Omitec cable
Its old interface. Been around a long time.

There are lots of interfaces that work with BMW EDIBAS the most popular interface being a EDICblue from softing which gets new firmware and is rebanded as a VAS tool

http://automotive.softing.com/en/product...amily.html
Find all posts by this user
Quote this message in a reply
 Thanks given by: Enabled , paro44
22-11-2016, 14:38 PM
Post: #5
RE: BMW Omitec cable
Not supports work with ADS modules (E34 and so )
Works well from E39
Find all posts by this user
Quote this message in a reply
 Thanks given by: Enabled , paro44
22-11-2016, 16:12 PM
Post: #6
RE: BMW Omitec cable
I know it is an older interface, but still supported and updated by BMW. Still shows up in ISTA VCI Config.
Very easy to carry around instead of large ICOM for quick jobs.

Thank you for replies, I was hoping it to do L-line like Omitec Desktop, oh well.
EDIC is interesting, as I always wondered what it looked like when seeing it in ediabas.ini
Find all posts by this user
Quote this message in a reply
07-01-2017, 20:10 PM
Post: #7
RE: BMW Omitec cable
Is possible to use Omitec at VAG?
Find all posts by this user
Quote this message in a reply
08-01-2017, 17:00 PM
Post: #8
RE: BMW Omitec cable
I have never tried it as a passthrough device. I will look into it, testing on my VW with ODIS. Very interesting idea!
Find all posts by this user
Quote this message in a reply
Post Reply 


Bookmarks

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  E9X CIC faceplate ribbon cable pinout in anees27 0 65 21-07-2017 10:48 AM
Last Post: anees27
  Solved ✔ K d Can bmw diagnsotic cable problem? in bmwlover 3 129 16-07-2017 19:45 PM
Last Post: bmwlover
XZBMW Lan cable for ICOM A2? in Rik 2 115 01-07-2017 14:21 PM
Last Post: Rik
XZBMW Special cable for esys? in yippy 4 191 18-06-2017 18:45 PM
Last Post: yippy
XSMini Strange problem with MINI R50 with K+Dcan cable in snypertje 13 344 21-04-2017 20:33 PM
Last Post: pdc
  (Solved)CCC update failed using K+dcan cable. in ninja_zx11 6 353 17-04-2017 16:55 PM
Last Post: ninja_zx11
  K-DCAN-Cable with ISTA 4 -> Problems while deleting error codes in Munich Simon 4 372 01-03-2017 21:44 PM
Last Post: Node
  Using k+dcan cable in vag's in avatarpr 0 191 01-03-2017 17:09 PM
Last Post: avatarpr
XZBMW F25 retrofited NBT - CID cable from CHAMP2 in matigdy 1 227 02-02-2017 22:12 PM
Last Post: matigdy
XZBMW Where to buy good quality K+D-CAN cable. in snypertje 26 1,997 20-01-2017 04:46 AM
Last Post: Loliceman

Forum Jump:


User(s) browsing this thread:
1 Guest(s)

Return to TopReturn to Content