Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

DF080 DF119 Won't run stationary
22-11-2016, 07:39 AM,
Post: #1
ORenult  DF080 DF119 Won't run stationary
Hello All,

My Megane 2 won't run stationary....
Read it with my can clip and i get DF080 and DF119
read here and there, most common causes TDC sensor camshaftsensor throtlebody
i changed the sensors, and cleaned the throtlebody....
Cleared the computer..

Still nothing well most the time... sometimes it runs smoothly no problem for a little while..

Please Help :s dontknow think
Quote this message in a reply
18-05-2017, 10:58 AM,
Post: #2
RE: DF080 DF119 Won't run stationary
Hi, please check also your cam belt. I have already two similar cases (one on Peugeot 307 - defective cam belt and other BMW - broken camshaft!). If you have replaced the sensor, then please check the cam belt and camshaft. My opinion is that just general observation is enough.

I forget to tell you also for the wiring to the camshaft sensor. Please check them as well.
Quote this message in a reply


Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content