Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

S1000RR E-Sys
28-11-2016, 13:19 PM,
Post: #1
S1000RR E-Sys
Is it possible to code a S1000RR (2012) with E-Sys ?

Which settings for ICOM clone must use in E-Sys

Which BRV needed in E-Sys

ICOM must relased or allocate

   
   
Quote this message in a reply
28-11-2016, 15:25 PM,
Post: #2
RE: S1000RR E-Sys
S1000RR (2012) with E-Sys ????or KFP???)))
Quote this message in a reply
28-11-2016, 17:16 PM, (This post was last modified: 28-11-2016, 17:17 PM by kerekt.)
Post: #3
RE: S1000RR E-Sys
S1000RR diag ISTA+ , coding+programing ISTA-P or E-SYS.
work fine with DIY cable from old 6cylinder connector, 4 wires need: gnd,12v,canl,canh, tested myself

set ICOM-DCAN i have genuine head, probably work with clone too

(28-11-2016, 13:19 PM)autoraedarum Wrote:  Is it possible to code a S1000RR (2012) with E-Sys ?

Which settings for ICOM clone must use in E-Sys

Which BRV needed in E-Sys

ICOM must relased or allocate
Quote this message in a reply
[+] 2 users say Thank You to kerekt for this post
28-11-2016, 19:47 PM,
Post: #4
RE: S1000RR E-Sys
I have made this adapter a 6 cylinder ignition cabel

Must i use this ip (169.244.92.38) and which port or should it be 127.0.0.1, allocate or relase

K001 is the right one

Thanks
Quote this message in a reply
28-11-2016, 21:29 PM,
Post: #5
RE: S1000RR E-Sys
You need ICOM-D adapter for motorcycle.
K+DCAN or ICOM-A for diagnostic and programing/coding with Ista D/P
What coding you want to do?!?
Quote this message in a reply
29-11-2016, 09:11 AM,
Post: #6
RE: S1000RR E-Sys
I can code my S1000RR with NCS-Expert, i will only try if it works with E-sys.

Does this ICAM-D adapter have any elektronic/logic insinde?

I can work with ISTA-P without ICOM-D adapter with my bike, i have flashed the newest soft
Quote this message in a reply
01-12-2016, 17:31 PM,
Post: #7
RE: S1000RR E-Sys
(29-11-2016, 09:11 AM)autoraedarum Wrote:  I can code my S1000RR with NCS-Expert, i will only try if it works with E-sys.

Does this ICAM-D adapter have any elektronic/logic insinde?

I can work with ISTA-P without ICOM-D adapter with my bike, i have flashed the newest soft

No,only adapter 16 to 10pin
Quote this message in a reply
[+] 2 users say Thank You to doktorabg for this post
02-12-2016, 09:58 AM,
Post: #8
RE: S1000RR E-Sys
With NCS or E-Sys
Quote this message in a reply
03-01-2017, 05:03 AM,
Post: #9
RE: S1000RR E-Sys
Depend on what year model , till 2014 ncs from 2014 e sys
Quote this message in a reply
09-10-2018, 11:53 AM,
Post: #10
RE: S1000RR E-Sys
hi
JA48zCGgTXpm86Uxb83YXQ==
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Aged Thread 】 BMW S1000RR immo rosi1000rr 10 2,961 16-10-2023, 08:19 AM
Last Post: 12manux
XZBMW ME17.2.42 BMS-0 BMW S1000RR immo off piotrekb_s3 4 1,017 28-03-2023, 15:19 PM
Last Post: pattrick
XZBMW BMW S1000RR EWS4 and new key 14TLC 5 1,476 28-06-2018, 15:52 PM
Last Post: raffy haddad
XZBMW BMW S1000RR coding with NCS woidhoid 3 2,194 17-06-2016, 06:25 AM
Last Post: woidhoid

Forum Jump:


Users browsing this thread:
1 Invisible User(s), 1 Guest(s)

Return to TopReturn to Content