Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

DERELEK Not Communication Problem.
29-11-2016, 03:37 AM,
Post: #1
ORenult  DERELEK Not Communication Problem.
DERELEK Not Communication Problem.

DERELEK USB DIAG3 users are asked.

Recently I bought DERELEK USB DIAG 3 as pre-owned.
There are some strange things in use.
When connected to the vehicle, the "Vehicle LAMP" lights up in red, and the vehicle can not communicate.
So I checked the OBD2 port and confirmed that there is no NO.1 PIN and it does not light green.
When the power is applied to the NO.1 PIN forcibly, a green light is turned on as shown in the photograph.
The cars I tested were "LAGUNA3 and Koleos and Fluence".
No NO.1 PIN was present in all of the vehicles.
So how do I solve the problem?
DDT2000 normally recognized the interface.
When you look at the picture, it automatically recognizes the port.
What settings on my device are wrong?
Or should I use the DERELEK interface to force a NO.1 PIN by modifying it?

I would like your advice.

https://www.dropbox.com/s/wfbgxqkxoxrkt0...1.gif?dl=0
https://www.dropbox.com/s/f31dgtazlauper...1.gif?dl=0
https://www.dropbox.com/s/flszoyjnqyx3cd...8.gif?dl=0
Quote this message in a reply
29-11-2016, 10:32 AM,
Post: #2
RE: DERELEK Not Communication Problem.
Have you paired your USB Diag 3 Derelek with DDT software ?
It is necessary to do that pair for good working
Quote this message in a reply
[+] 2 users say Thank You to alfabit for this post
30-11-2016, 00:33 AM,
Post: #3
RE: DERELEK Not Communication Problem.
(29-11-2016, 10:32 AM)alfabit Wrote:  Have you paired your USB Diag 3 Derelek with DDT software ?
It is necessary to do that pair for good working



I bought a DERELEK USB DIAG 3 for a while ago.
How can I match the DDT2000 to the USB DIAG3?



Removed per Rule 5: Do not post personal information, email addresses, Skype, social media, phone numbers etc.
Quote this message in a reply
30-11-2016, 07:19 AM,
Post: #4
RE: DERELEK Not Communication Problem.
Ask you seller to do it for you.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  alinace iv chinese problem davito1 4 184 31-01-2024, 18:08 PM
Last Post: davito1
ORenult Renault Clio5 Multimendia Problem, kukata_83 12 779 12-01-2024, 13:52 PM
Last Post: morfej
  megane 3 1.5 dci 3.4 delphi AC problem skyrimzz 2 139 08-11-2023, 22:20 PM
Last Post: skyrimzz
ORenult Renault CAN Clip problem BMWFXX 0 309 28-09-2023, 13:32 PM
Last Post: BMWFXX
  Nissan Navara Crankshaft sensor Problem spanaz1 4 435 12-08-2023, 15:04 PM
Last Post: Clusters
  Autel and LaunchTech problem seeing misfire CATAHA 0 252 19-06-2023, 18:50 PM
Last Post: CATAHA
  problem with programming card megane3 bboctavian 1 323 29-01-2023, 12:01 PM
Last Post: KeeleyKaayz
ORenult Master 3ph1 '17 ABS unit problem Olgierdo83 0 276 16-10-2022, 14:51 PM
Last Post: Olgierdo83
  Solved ✔ megane 2 cabrio 1.9dci edc16c36 no communication with ecu ?? skyrimzz 8 999 31-08-2022, 21:19 PM
Last Post: skyrimzz
  Laguna 2 1.9dci ECU not recognise problem galisdoo 2 465 25-08-2022, 06:41 AM
Last Post: galisdoo

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content