Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
DERELEK Not Communication Problem.
29-11-2016, 03:37 AM,
Post: #1
|
|||
|
|||
DERELEK Not Communication Problem.
DERELEK Not Communication Problem.
DERELEK USB DIAG3 users are asked. Recently I bought DERELEK USB DIAG 3 as pre-owned. There are some strange things in use. When connected to the vehicle, the "Vehicle LAMP" lights up in red, and the vehicle can not communicate. So I checked the OBD2 port and confirmed that there is no NO.1 PIN and it does not light green. When the power is applied to the NO.1 PIN forcibly, a green light is turned on as shown in the photograph. The cars I tested were "LAGUNA3 and Koleos and Fluence". No NO.1 PIN was present in all of the vehicles. So how do I solve the problem? DDT2000 normally recognized the interface. When you look at the picture, it automatically recognizes the port. What settings on my device are wrong? Or should I use the DERELEK interface to force a NO.1 PIN by modifying it? I would like your advice. https://www.dropbox.com/s/wfbgxqkxoxrkt0...1.gif?dl=0 https://www.dropbox.com/s/f31dgtazlauper...1.gif?dl=0 https://www.dropbox.com/s/flszoyjnqyx3cd...8.gif?dl=0 |
|||
29-11-2016, 10:32 AM,
Post: #2
|
|||
|
|||
RE: DERELEK Not Communication Problem.
Have you paired your USB Diag 3 Derelek with DDT software ?
It is necessary to do that pair for good working |
|||
30-11-2016, 00:33 AM,
Post: #3
|
|||
|
|||
RE: DERELEK Not Communication Problem.
(29-11-2016, 10:32 AM)alfabit Wrote: Have you paired your USB Diag 3 Derelek with DDT software ? I bought a DERELEK USB DIAG 3 for a while ago. How can I match the DDT2000 to the USB DIAG3? Removed per Rule 5: Do not post personal information, email addresses, Skype, social media, phone numbers etc. |
|||
30-11-2016, 07:19 AM,
Post: #4
|
|||
|
|||
RE: DERELEK Not Communication Problem.
Ask you seller to do it for you.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content