Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Bmw K-DCAN modification
08-12-2016, 21:46 PM, (This post was last modified: 08-12-2016, 21:49 PM by doktorabg.)
Post: #21
RE: Bmw K-DCAN modification
(08-12-2016, 18:53 PM)ocostel Wrote:  
(08-12-2016, 06:36 AM)snypertje Wrote:  
(07-12-2016, 18:09 PM)doktorabg Wrote:  From 2010 BMW use pin 8 for Ethernet therefor you need switch between pin 7 and pin 8 like Catana said.
For E series use dcan utility but for F series is better to use Ethernet to OBD 16 pin (cable for E-SYS) with ISTA-D/P

2/2007 and older vehicles requires the pin 7 and 8 to be bridged!!

You must bridge or not 7 & 8 pins, like in picture attached

Up to 2010 the easy way is to bridge.
From 3.2007 use DCAN Utility.
From 2010 not use the bridge ,use only pin 7 because pin 8 is for Ethernet and therefore comes problem with communikation with car.
CAN L and H are still on pin 6,14 and therefore use DCAN utility to change the speed.
Quote this message in a reply
12-12-2016, 20:17 PM,
Post: #22
RE: Bmw K-DCAN modification
I have a fairly similar but different cable. I bought it 3 years ago and I only tried it with two E60 2004 and another E60 2005 and so far I have not had any problems. Do you have any idea if I have to make the modification for older models? (I leave the link of the seller to see if they know it: Interface USB OBD2 for BMW - INPA/Ediabas - K+DCAN allows full diagnostic of BMW from 1998 to 2008 (all function as in OMNITEC interface))
Quote this message in a reply
[+] 2 users say Thank You to Orsimi for this post
12-12-2016, 20:36 PM,
Post: #23
XZBMW  RE: Bmw K-DCAN modification
(12-12-2016, 20:17 PM)Orsimi Wrote:  I have a fairly similar but different cable. I bought it 3 years ago and I only tried it with two E60 2004 and another E60 2005 and so far I have not had any problems. Do you have any idea if I have to make the modification for older models? (I leave the link of the seller to see if they know it: Interface USB OBD2 for BMW - INPA/Ediabas - K+DCAN allows full diagnostic of BMW from 1998 to 2008 (all function as in OMNITEC interface))

Yep you need modification for older models.wink
Quote this message in a reply
[+] 2 users say Thank You to Bimmer540 for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  FEM Not working with ENET but works wtih DCAN armenh7 1 91 Yesterday, 21:44 PM
Last Post: Marx
  Solved // K+DCAN in ISTA Pentheus 7 397 04-02-2024, 20:15 PM
Last Post: user0086
  Solved ✔ E71 bricked frm with k-dcan bosna1973 3 276 28-01-2024, 14:23 PM
Last Post: bosna1973
XZBMW xDrive - Modification of the drive distribution through coding. mmwmmw 30 5,952 18-01-2024, 21:59 PM
Last Post: xPyro
  NCSExpert coding DSC56 in an R55 with K/DCAN thecarfixer 6 492 04-07-2023, 14:33 PM
Last Post: thecarfixer
XZBMW CHAMP2 F30 2012 Apps/Live/Internet or HU Modification BimmerLubuskie 3 425 11-04-2023, 22:56 PM
Last Post: jaramillo
XZBMW ISTA 4.39.20 k+dcan Voltage Dišovas 1 373 29-03-2023, 10:05 AM
Last Post: rana
XZBMW vehicle bricked after modification of FA and software update Danmac 9 1,333 10-09-2022, 12:50 PM
Last Post: bennymx
  VPN remote coding with K Dcan cable egoy936 24 5,114 22-07-2022, 07:49 AM
Last Post: a1ma2
  DCAN Firmware Update Fps 5 855 05-05-2022, 18:22 PM
Last Post: Fps

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content