Please Make Sure You Read The Forum Rules! , Thanks for registering We are glad you have chosen to be a part of our community :) Please do not use email addresses, website URLs, Skype info, or any other contact info as your Username.
  1. ObdToolUsa

  2. Martech

  3. ATM - Balkan

    atm balkan file service
  4. Piwis tester II

  5. ChiPTuninG



Post Reply 
Bmw K-DCAN modification
08-12-2016, 21:46 PM (This post was last modified: 08-12-2016 21:49 PM by doktorabg.)
Post: #21
RE: Bmw K-DCAN modification
(08-12-2016 18:53 PM)ocostel Wrote:  
(08-12-2016 06:36 AM)snypertje Wrote:  
(07-12-2016 18:09 PM)doktorabg Wrote:  From 2010 BMW use pin 8 for Ethernet therefor you need switch between pin 7 and pin 8 like Catana said.
For E series use dcan utility but for F series is better to use Ethernet to OBD 16 pin (cable for E-SYS) with ISTA-D/P

2/2007 and older vehicles requires the pin 7 and 8 to be bridged!!

You must bridge or not 7 & 8 pins, like in picture attached

Up to 2010 the easy way is to bridge.
From 3.2007 use DCAN Utility.
From 2010 not use the bridge ,use only pin 7 because pin 8 is for Ethernet and therefore comes problem with communikation with car.
CAN L and H are still on pin 6,14 and therefore use DCAN utility to change the speed.
Find all posts by this user
Quote this message in a reply
12-12-2016, 20:17 PM
Post: #22
RE: Bmw K-DCAN modification
I have a fairly similar but different cable. I bought it 3 years ago and I only tried it with two E60 2004 and another E60 2005 and so far I have not had any problems. Do you have any idea if I have to make the modification for older models? (I leave the link of the seller to see if they know it: Interface USB OBD2 for BMW - INPA/Ediabas - K+DCAN allows full diagnostic of BMW from 1998 to 2008 (all function as in OMNITEC interface))
Find all posts by this user
Quote this message in a reply
 Thanks given by: snypertje
12-12-2016, 20:36 PM
Post: #23
XZBMW RE: Bmw K-DCAN modification
(12-12-2016 20:17 PM)Orsimi Wrote:  I have a fairly similar but different cable. I bought it 3 years ago and I only tried it with two E60 2004 and another E60 2005 and so far I have not had any problems. Do you have any idea if I have to make the modification for older models? (I leave the link of the seller to see if they know it: Interface USB OBD2 for BMW - INPA/Ediabas - K+DCAN allows full diagnostic of BMW from 1998 to 2008 (all function as in OMNITEC interface))

Yep you need modification for older models.wink
Find all posts by this user
Quote this message in a reply
 Thanks given by: Orsimi
Post Reply 


Bookmarks

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Using k+dcan cable in vag's in avatarpr 0 91 01-03-2017 17:09 PM
Last Post: avatarpr
  DCAN, Icom in chriskross 3 1,997 17-11-2015 19:32 PM
Last Post: banoo
  BMW INPA / Ediabas D + K + P DCAN USB interface Compatible with ISTA / D and ISTA / P in daniel978 2 2,082 23-04-2014 13:38 PM
Last Post: Bimmeristi

Forum Jump:


User(s) browsing this thread:
1 Guest(s)

Return to TopReturn to Content