Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Corsa c dash and bcm issues
01-12-2016, 14:45 PM,
(This post was last modified: 08-12-2016, 10:27 AM by Clusters.)
Post: #1
|
|||
|
|||
Corsa c dash and bcm issues
Hello all
Corsa c 2005 1.2 z12xep has starting issue will start for 5 secs then cut out. I have tried pressing dash all the usual fix's but no joy. Symptoms dash has no spanner light for service it doesn't even come on at Any point sure it should be on till you start the engine ? INSP shows 0 in milage LCD and won't let me reset. Also the following fault codes from dash and bcm Bcm :B3058 (0) vehicle ID not programmed-present Also v bus errors U2101 U2103 U2104 Dash : 10 vehicle ID not programmed 13 security code not programmed also I tried another ecu set but I believe it has exactly the dash issue as would Not start and INSP showed 0 and no spanner light on this dash also. Tried Programming vin into bcm but still spits ID not proggrammed code Any ideas this seems to be a common problem which is probably why there's so many corsa c dashes for sale on eBay. Please help If mine or others posts and info are helpful please give thanks/rep
|
|||
01-12-2016, 17:12 PM,
Post: #2
|
|||
|
|||
RE: Corsa c dash and bcm issues
Try reset both dash and bcm then attempt to start leave both reset
|
|||
01-12-2016, 17:43 PM,
Post: #3
|
|||
|
|||
RE: Corsa c dash and bcm issues
(01-12-2016, 17:12 PM)racin-snake Wrote: Try reset both dash and bcm then attempt to start leave both reset Cheers I will try it out later and let you know Any ideas why spanner light missing ? If mine or others posts and info are helpful please give thanks/rep
|
|||
01-12-2016, 17:54 PM,
Post: #4
|
|||
|
|||
RE: Corsa c dash and bcm issues
I Have only ever seen spanner light missing when the immobiliser module (LS MODULE ) was broken
|
|||
01-12-2016, 20:15 PM,
Post: #5
|
|||
|
|||
RE: Corsa c dash and bcm issues
racingsnake='1480614854' Wrote: I Have only ever seen spanner light missing when the immobiliser module (LS MODULE ) was brokenHmm was missing on old ecu set and missing on new 1 but both immos seem ok they are UN ring on this one I'll try resets like you said hopefully helps a dump with pin would be handy so I can flash dash Also do you know about the code indexs ? If mine or others posts and info are helpful please give thanks/rep
|
|||
01-12-2016, 20:50 PM,
Post: #6
|
|||
|
|||
RE: Corsa c dash and bcm issues
Check the CAN System wires from BCM to Dash you have a breakage some where down the line..............
If My Post Was Helpful
Than Please Click On Thanks & Rep.. |
|||
Reputation: +1 - Raidraid [+1] | |||
01-12-2016, 21:43 PM,
Post: #7
|
|||
|
|||
RE: Corsa c dash and bcm issues
(01-12-2016, 20:50 PM)Ashraf6119 Wrote: Check the CAN System wires from BCM to Dash you have a breakage some where down the line..............Cheers any ideas on wire colour or number location etc If mine or others posts and info are helpful please give thanks/rep
|
|||
02-12-2016, 00:20 AM,
Post: #8
|
|||
|
|||
RE: Corsa c dash and bcm issues
Check the green and white twisted pair of CAN wires on right hand side chassis leg between ecu and bcm . abs there will be a rotted wire above gearbox at the inner wing / chassis leg
HERE https://www.picoauto.com/library/case-st...1615-p1616 |
|||
02-12-2016, 08:08 AM,
Post: #9
|
|||
|
|||
RE: Corsa c dash and bcm issues
(02-12-2016, 00:20 AM)racin-snake Wrote: Check the green and white twisted pair of CAN wires on right hand side chassis leg between ecu and bcm . abs there will be a rotted wire above gearbox at the inner wing / chassis leg Yes agreed with this follow those two CAN wires or check the continuity of those wire from Engine ECU to BCM to Instrument Cluster.........Where ever you find the brake take some pictures and post them here.......... If My Post Was Helpful
Than Please Click On Thanks & Rep.. |
|||
02-12-2016, 13:57 PM,
Post: #10
|
|||
|
|||
RE: Corsa c dash and bcm issues
Thanks guys info very helpful
racing snake tried start with Bcm and ipc reset no difference I also checked wiring between instruments and immo and bcm and they seem fine. It's gotta be the two can wires as ecu stores incorrect id from bcm and ipc. fingers crossed I will check in few hours and report back If mine or others posts and info are helpful please give thanks/rep
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Fiat Talento Dash km correction higher | Cryjack | 4 | 80 |
28-04-2024, 11:59 AM Last Post: iProg-carradio |
|
Nissan NV200 dash | pawel7924 | 4 | 1,411 |
27-04-2024, 14:41 PM Last Post: Ecu_Blast |
|
Citroen C4 dash P9664319880 need pinout | pinotec | 5 | 107 |
24-04-2024, 13:51 PM Last Post: al70 |
|
Honda Varadero 125 2005 year - need dash power pinout | slevy70 | 0 | 26 |
24-04-2024, 10:51 AM Last Post: slevy70 |
|
Solved ✔ suzuki vitara dash 93c86 milage corection | sabian | 3 | 79 |
22-04-2024, 16:59 PM Last Post: al70 |
|
mazda demio 93c86 dash adjust | gskuvarega | 3 | 83 |
19-04-2024, 11:57 AM Last Post: gskuvarega |
|
Sportage Dash Yazaki | Misiek | 2 | 100 |
17-04-2024, 09:31 AM Last Post: Misiek |
|
w447 dash & can filter | JaVlk | 10 | 609 |
09-04-2024, 08:47 AM Last Post: JaVlk |
|
Solved ✔ giulietta edc17c69 dash | tony1968 | 4 | 117 |
09-04-2024, 07:09 AM Last Post: tony1968 |
|
Peugeot partner dash pinout | al70 | 5 | 179 |
07-04-2024, 15:38 PM Last Post: al70 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content