[virtualman93]

Hi mate, I need help, my vcm 2 hq clone dont't finish update so i can't use it.
i try to reset it with ids v86 and with vci managere 2.1.1.5. with ids v101 . with power supply and without. i try to change sd card and usb cable. try with 3 different pc.. but when installation arrives at installation 18 of 38 error came. if i try recovery with vci manager i can see that it interrupts installation when transfer vci rt shared library... i try many and many times but I'm not able to get a workly vcm... sn is 31605352

[SCOTT]

Hi mate, I need help, my vcm 2 hq clone dont't finish update so i can't use it.
i try to reset it with ids v86 and with vci managere 2.1.1.5. with ids v101 . with power supply and without. i try to change sd card and usb cable. try with 3 different pc.. but when installation arrives at installation 18 of 38 error came. if i try recovery with vci manager i can see that it interrupts installation when transfer vci rt shared library... i try many and many times but I'm not able to get a workly vcm... sn is 31605352

What version ford ids did you last use with the VCMII successfully

try the vci manager from the version of ford ids you last used successfully

try with your vci manager on a different computer without and ids installed at all in recovery mode.

make sure firewall is off, install the vci manager and try it again several times.

[virtualman93]

I don t know what version of VCM there was , because it has never work. If i try vcm 2.3.85.8 it dont finish recovery but end to beep and it is recognised by soft , but seems not work however. The other vcm dont finish reset and vcm beep every second. So i think there was 2.3.85.8 version... I try to put the backup into tf card, it returns error write so i put in vcm new 16 gb tf card

Inviato dal mio Nexus 5 utilizzando Tapatalk

---

With other versione it give error when installare 18 of 36 component , with 2.3.85.8 it give error at 20 of 36

Inviato dal mio Nexus 5 utilizzando Tapatalk

[SCOTT]

I don t know what version of VCM there was , because it has never work. If i try vcm 2.3.85.8 it dont finish recovery but end to beep and it is recognised by soft , but seems not work however. The other vcm dont finish reset and vcm beep every second. So i think there was 2.3.85.8 version... I try to put the backup into tf card, it returns error write so i put in vcm new 16 gb tf card

Inviato dal mio Nexus 5 utilizzando Tapatalk

---

With other versione it give error when installare 18 of 36 component , with 2.3.85.8 it give error at 20 of 36

Inviato dal mio Nexus 5 utilizzando Tapatalk

I think that is way too new for your vcmii

try with 2.1.1.5 or try 2.1.119.3 on a pc with firewall turned off , and no ids software or where any ha been installed before .

have patience, you may need to try a good few time and still no guarantees