Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
11-12-2016, 17:49 PM,
Post: #1
|
|||
|
|||
Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
Have a G series EVO here, connected an nbt cid to apix2 cid connector.
I changed the display settings to APIX 1 etc but not working, I went from NO SIGNAL to black screen. Anyway to get this to work with APIX 1 screen or is this not possible at all? |
|||
11-12-2016, 23:23 PM,
(This post was last modified: 11-12-2016, 23:23 PM by pshoey.)
Post: #2
|
|||
|
|||
Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
You need to also set the resolution, color depth and mode to match your display.
Sent from my iPhone using Tapatalk You need to also set the resolution, color depth and mode to match your display. Sent from my iPhone using Tapatalk Email: [email protected] Skype: [email protected]
HU Engineering Tool MGU Engineering Tool - now with field update mode via Feature Installer. Coding 2.0 |
|||
11-12-2016, 23:50 PM,
Post: #3
|
|||
|
|||
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
Yes i have already done this, but the cid does not function:
• CID_APIX_MODE apix1 = 01 • CID_COLOR_DEPTH 18 = 01 • CID_COM_MODE Left: spi = 01 and i have also changed resolution. This is an gxx evo unit, perhaps it only functions with gxx cids ??? Does a apix2 cid from f series functions properly ? (11-12-2016, 23:23 PM)pshoey Wrote: You need to also set the resolution, color depth and mode to match your display. |
|||
12-12-2016, 10:06 AM,
Post: #4
|
|||
|
|||
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
Hello!
Please remember that the CID from NBT and the CID from NBTevo use different voltages!! I'm nearly sure that you have to use a converter. It's the same if you want to retrofit a F15 10,25" NBT CID onto a F20 NBTevo (converter to 8,3-8,8V is required). In your case you have to convert in the other direction- more voltage, not less. CU Oliver |
|||
12-12-2016, 10:52 AM,
(This post was last modified: 12-12-2016, 14:13 PM by amigo74.)
Post: #5
|
|||
|
|||
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
I have read in other forum that gxx evo units only functions with gxx cids.
Is that right ? Have anybody tested a gxx evo unit with apix1 cid from nbt ? Can anybody recommend a power regulator, which functions properly ? Ok for all others, perhaps it helps: Gxx evo units cannot be used with apix1 cids at all. Only fxx evo units functions with apix1 cids !! |
|||
23-06-2017, 13:28 PM,
Post: #6
|
|||
|
|||
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
(12-12-2016, 10:52 AM)amigo74 Wrote: I have read in other forum that gxx evo units only functions with gxx cids. Hello I have G12 NBT evo Unit and use CID from NBT ;] Is work without problems ;] Did I helped you?
Than please, give me Reputation and Thanks. EntryNav2 - Custom FSC SET for any VIN - Patch REMOTE EntryNav2 - Component Protection remove REMOTE EntryNav2 - Carplay with ATM or withOUT REMOTE 8HP - Clear ISN Remote BMW FSC Repair packs | FSC map codes (normal / Lifetime) Full FSC Set + CarPlay Fullscreen - NBT EVO ID5/6(any software version) EVO iDrive 4 to iDrive 6 FLASH including CarPlay Fullscreen EVO Bootloader FIX / HW4.1 BTLD FIX / VO FIX / REGION CHANGE / BLACK SCREEN FIX / CLEAR V850 KAFAS 2/4 SLI / MGU REGION CHANGE / CARPLAY KAFAS4 Virgin |
|||
24-06-2017, 12:55 PM,
Post: #7
|
|||
|
|||
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
It needs a CID cable with Voltage regulator, and the quality won't be at its best.
All my knowledge is free for exchange with valuable information
Sharing->Development
|
|||
24-06-2017, 13:22 PM,
Post: #8
|
|||
|
|||
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
LM2596 Step Down Module DC
Voltage Regulator ebay 1$ |
|||
24-06-2017, 13:35 PM,
Post: #9
|
|||
|
|||
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
(24-06-2017, 13:22 PM)MaxBmw Wrote: LM2596 Step Down Module DC How can you mount it? i buy the cable already mounted and working. All my knowledge is free for exchange with valuable information
Sharing->Development
|
|||
24-06-2017, 15:12 PM,
Post: #10
|
|||
|
|||
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
For my part I had two NBT EVO one of series F and another one of series G.
At first the NBT EVO series F worked perfectly with the screen HU_NBT with a voltage regulator, no worries, when I plug the NBT EVO G series, I coded the parameters identically, the screen Remained in no signal, I concluded that the NBT EVO series G only accepted the screen of series G. So I put a 10.25 "touch screen in my E90 |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content