Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Rheingold, KDCan and no clamp 15
06-01-2017, 20:57 PM,
Post: #11
Rheingold, KDCan and no clamp 15
(16-12-2016, 11:18 AM)Martin1986 Wrote:  
(16-12-2016, 09:29 AM)Almaretto Wrote:  
(15-12-2016, 17:54 PM)Martin1986 Wrote:  
(15-12-2016, 17:50 PM)Almaretto Wrote:  
(15-12-2016, 17:45 PM)Martin1986 Wrote:  So the tool won't work for newer ista? Need to downgrade then?

Tool is Version specific.
Ok. Så before programming a module, it is best that I downgrade ista, so it will recognize when I need to switch off ignition?

ISTA-P Loader is not specific to main program version.
ISTA+ Voltage Control is specific to program version.
But ista loader doesn't help with, that the car doesn't recognize me pulling out the ignition key


With ISTA/P just right click icon in task bar KL15 OFF (after remove key)
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 135 26-03-2024, 12:09 PM
Last Post: hlip
XZBMW PASSTHRU for RHEINGOLD misterrob 20 12,524 09-07-2023, 07:19 AM
Last Post: b3dn
  E90 2006 330xi n52 after start clamp 15 goes off mr_nitroz 9 527 06-07-2023, 07:19 AM
Last Post: mr_nitroz
XZBMW BMW Rheingold 3.47.10 cr0x89 2 612 20-02-2023, 17:22 PM
Last Post: cr0x89
  Help installing driver for kdcan on usb 3.1 bosna1973 7 520 28-12-2022, 16:18 PM
Last Post: Siki78
XZBMW Rheingold 4.13.14 Standalone / SDP 4.13.11 / ISTA-P 3.65.1.002 spider80 165 57,000 23-12-2022, 15:27 PM
Last Post: PsevDo
  DIS V57 SSS V32 KDCAN EuroCSL 0 238 22-11-2022, 02:25 AM
Last Post: EuroCSL
  Rheingold get error while programming -> "faulty icom -car connection -> programming blacktoy 8 1,243 11-11-2022, 18:51 PM
Last Post: blacktoy
  BMW motorbikes and Rheingold ISTA 4.32.2x blacktoy 2 525 25-04-2022, 11:46 AM
Last Post: blacktoy
XZBMW Solved ✔ ISTA-D Rheingold 4.32.32 Diaginstall 3 1,963 26-02-2022, 09:19 AM
Last Post: Diaginstall

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content