Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Rheingold 4.03.13 Standalone / SDP 4.02.31 / ISTA-P 3.60.2.001 Torrent
22-12-2016, 23:38 PM,
Post: #11
RE: Rheingold 4.03.13 Standalone / SDP 4.02.31 / ISTA-P 3.60.2.001 Torrent
Hi Spider80, i've a question for you. Are SDP data already in ISTA P? I found a folder wich seems to be the same.... path is ista-p\bmw\services\data\ecudata\psdzdata\..... if those be the same i can make a symbolic link because my Hard Disk is almost full!

[Image: GIF-Bandiera-Italiana.gif]
Quote this message in a reply
23-12-2016, 00:27 AM,
Post: #12
RE: Rheingold 4.03.13 Standalone / SDP 4.02.31 / ISTA-P 3.60.2.001 Torrent
(22-12-2016, 23:38 PM)____ANGEL___ Wrote:  Hi Spider80, i've a question for you. Are SDP data already in ISTA P? I found a folder wich seems to be the same.... path is ista-p\bmw\services\data\ecudata\psdzdata\..... if those be the same i can make a symbolic link because my Hard Disk is almost full!

I am not sure about this version, but other releases have some differences. Easiest way to check is to use program like Beyond Compare. It will quickly analyze and display differences.


Quote this message in a reply
23-12-2016, 01:55 AM, (This post was last modified: 23-12-2016, 13:24 PM by spider80.)
Post: #13
XZBMW  RE: Rheingold 4.03.13 Standalone / SDP 4.02.31 / ISTA-P 3.60.2.001 Torrent
(22-12-2016, 23:38 PM)____ANGEL___ Wrote:  Hi Spider80, i've a question for you. Are SDP data already in ISTA P? I found a folder wich seems to be the same.... path is ista-p\bmw\services\data\ecudata\psdzdata\..... if those be the same i can make a symbolic link because my Hard Disk is almost full!

They are equivalent, but have difference from each other. If U don't programming via ISTA-D don't use it.
Or change registry and use from ISTA-P. For example :

[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BMWGroup\ISPI\Rheingold]
"BMW.Rheingold.Programming.PsdzDataPath"="d:\\bmw\\ista-p\\bmw\\services\\data\\ecudata"

Don't forget press [Image: 655659acbccb82153e5bf498005c5711.gif] and [Image: 462af960d0477dcae1d2fa68fa59686f.gif], if my post helped you.
Remote install/update of diagnostic software
[Image: b0d366e737125313340a6a2af955e60e.gif]
Reputation: +3 - ____ANGEL___ [+1] , JarsaR [+1] , svo2 [+1]
Quote this message in a reply
[+] 10 users say Thank You to spider80 for this post
23-12-2016, 17:23 PM,
Post: #14
RE: Rheingold 4.03.13 Standalone / SDP 4.02.31 / ISTA-P 3.60.2.001 Torrent
Hey,

Installed within instructions and both programs P and D start up normally.

However im getting a ERROR:
The vehicle could not be identified. Please check the access to the vehicle and check whether the testing-analysis-diagnosis has been activated.

This is when im trying to read with ISTA-D and i tried ISTA-P but it couldnt find my VIN number so i didnt go forward.

I tried a few different drivers for my K+DCAN OBD with a manual switch and now have the newest FTDI 2.12.24 for win 7-64bit.

One thing im confused about is i have C:EDIABAS where i changed the obd.ini normally. But there is also a RHEINGOLD/EDIABAS folder where i didnt change. should i ?

Any suggestions?
Quote this message in a reply
24-12-2016, 02:42 AM, (This post was last modified: 24-12-2016, 02:47 AM by spider80.)
Post: #15
XZBMW  RE: Rheingold 4.03.13 Standalone / SDP 4.02.31 / ISTA-P 3.60.2.001 Torrent
(23-12-2016, 17:23 PM)Niilopi Wrote:  Hey,

Installed within instructions and both programs P and D start up normally.

However im getting a ERROR:
The vehicle could not be identified. Please check the access to the vehicle and check whether the testing-analysis-diagnosis has been activated.

This is when im trying to read with ISTA-D and i tried ISTA-P but it couldnt find my VIN number so i didnt go forward.

I tried a few different drivers for my K+DCAN OBD with a manual switch and now have the newest FTDI 2.12.24 for win 7-64bit.

One thing im confused about is i have C:EDIABAS where i changed the obd.ini normally. But there is also a RHEINGOLD/EDIABAS folder where i didnt change. should i ?

Any suggestions?

In Rheingold folder don't change anything.
Read FAQ carefully all in there.
Pages 7-15.

Don't forget press [Image: 655659acbccb82153e5bf498005c5711.gif] and [Image: 462af960d0477dcae1d2fa68fa59686f.gif], if my post helped you.
Remote install/update of diagnostic software
[Image: b0d366e737125313340a6a2af955e60e.gif]
Quote this message in a reply
24-12-2016, 07:50 AM,
Post: #16
RE: Rheingold 4.03.13 Standalone / SDP 4.02.31 / ISTA-P 3.60.2.001 Torrent
(23-12-2016, 17:23 PM)Niilopi Wrote:  Hey,

Installed within instructions and both programs P and D start up normally.

However im getting a ERROR:
The vehicle could not be identified. Please check the access to the vehicle and check whether the testing-analysis-diagnosis has been activated.

This is when im trying to read with ISTA-D and i tried ISTA-P but it couldnt find my VIN number so i didnt go forward.

I tried a few different drivers for my K+DCAN OBD with a manual switch and now have the newest FTDI 2.12.24 for win 7-64bit.

One thing im confused about is i have C:EDIABAS where i changed the obd.ini normally. But there is also a RHEINGOLD/EDIABAS folder where i didnt change. should i ?

Any suggestions?

First of all depending of your K-DCAN its better to use the FTDI drivers up to 2.10
The new one not working with any FTDI.
As you know the Chinese clones use fake chips the most
Secondlly Check in Device Manager on which com port was allocated for the K-DCAN
Change it if its need on com 9 ( default in EDIABAS/BIN/obd.ini )
Then reboot and check again if you can go ahead
Good luck
Quote this message in a reply
25-12-2016, 02:48 AM, (This post was last modified: 25-12-2016, 02:52 AM by Loliceman.)
Post: #17
RE: Rheingold 4.03.13 Standalone / SDP 4.02.31 / ISTA-P 3.60.2.001 Torrent
(23-12-2016, 17:23 PM)Niilopi Wrote:  Hey,

Installed within instructions and both programs P and D start up normally.

However im getting a ERROR:
The vehicle could not be identified. Please check the access to the vehicle and check whether the testing-analysis-diagnosis has been activated.

This is when im trying to read with ISTA-D and i tried ISTA-P but it couldnt find my VIN number so i didnt go forward.

I tried a few different drivers for my K+DCAN OBD with a manual switch and now have the newest FTDI 2.12.24 for win 7-64bit.

One thing im confused about is i have C:EDIABAS where i changed the obd.ini normally. But there is also a RHEINGOLD/EDIABAS folder where i didnt change. should i ?

Any suggestions?


As Spider80 said, Don't change the Rheingold/Ediabas folder. The ediabas inside Rheingold will automatically adapt with your "C:/Ediabas/".


If you are trying to connect to a 2007+ BMW, this issue can easily be solved by running the K-DCAN Utility. Also, your cable may need to have pins 7+8 soldered together for this to work.

If your connecting to any early BMW <-2000 chances are that your cable is not supporting K-line, unfortunately most china clones don't.

Read this article regarding fake FTDI clones:
LINK

I don't have a lot of information regarding your issue, but here is the general tips from me.

Try this at your own risk:

*Try to download the modded FTDI drivers attached to this post, connect your cable and install them. Remove any previous installed drivers

*Uninstall any previous versions of Ediabas, if you want, backup the files instead of removing. Just make sure that folder is gone from your C drive.

*Install the "7.3.0 Patched Ediabas" link below. under

*Try not to change any of the parameters inside Ediabas.ini or OBD.ini, if it doesn't work - make sure that you only change one parameter at the time, to avoid messing anything up and loosing track of recent changes.
Optionally you can reinstall BMW_Standard_Tools_2.12 and setup your cable setup again.

*Try to use another USB port on your computer, preferably a USB 1.1 or 2.0. (I'v read somewhere that some USB 3.0 controllers wont work with K+DCAN cables)

*Download USBDeview (google it), Check properties inside the program for your K+DCAN cable. Post the information here as an image.

*As a last resort, check under BIOS settings for USB options, it might be some odd setting like "Legacy emulation" or similar.
Don't change any BIOS setting if you are uncertain.


*Lastly, try downloading M_Prog or CANHacker tools and check your actual cable and chip.
Don't use these tools if your don't know what they do.


*If it still doesn't work, accept your loss and go order a new working cable from a well known supplier like One Stop Electronics.

*Good luck!


Attached Files
FTDI 2.10 modded drivers kdcan.txt
File Type: .txt
Downloaded: 45 times
Size: 70 bytes

Patched_EDIABAS_730.txt
File Type: .txt
Downloaded: 27 times
Size: 70 bytes


Please, Press the Buttons [Image: postbit_thx.gif] and [Image: postbit_reputation.gif] if you feel that this post helped you!

Reputation: +2 - volavka [+2]
Quote this message in a reply
[+] 4 users say Thank You to Loliceman for this post
03-01-2017, 14:21 PM,
Post: #18
RE: Rheingold 4.03.13 Standalone / SDP 4.02.31 / ISTA-P 3.60.2.001 Torrent
Hello,

Do anyone have a issue with this version and running headlight adjustment?

I'm unable to find the "lightning" option under Vehicle Management > Service Function > Body.

Trying to do this on an e90.

Thanks
Quote this message in a reply
04-01-2017, 06:04 AM,
Post: #19
RE: Rheingold 4.03.13 Standalone / SDP 4.02.31 / ISTA-P 3.60.2.001 Torrent
Dear Sir,

Thanks for your sharing.
Do you have ZHCN for DBs?
Quote this message in a reply
04-01-2017, 15:29 PM,
Post: #20
RE: Rheingold 4.03.13 Standalone / SDP 4.02.31 / ISTA-P 3.60.2.001 Torrent
(03-01-2017, 14:21 PM)Mizta Insane Wrote:  I'm unable to find the "lightning" option under Vehicle Management > Service Function > Body.
[Image: 7f92745e90cddda610d75ff7c453b9ef.jpg]
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  ista 4.46 Standalone kiranabc 31 2,768 3 minutes ago
Last Post: kiranabc
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 274 4 hours ago
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,254 Yesterday, 20:02 PM
Last Post: Node
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,646 627,209 Yesterday, 16:29 PM
Last Post: Sedoy
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,411 Yesterday, 10:39 AM
Last Post: MINIGP1610
XZBMW BMW PSdZData 4.33.31 Full - Torrent carsoftcare 1 86 26-03-2024, 16:36 PM
Last Post: luntik
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 119 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 155 26-03-2024, 05:11 AM
Last Post: 2013m5
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 660 25-03-2024, 08:11 AM
Last Post: Node
XZBMW Ultimate Ediabas/ISTA+ voltage control V3 Node 322 121,427 24-03-2024, 23:45 PM
Last Post: armenh7

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content