Advanced Search
Hello There, Guest! Login — Register
Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Rheingold 4.03.13 Standalone / SDP 4.02.31 / ISTA-P 3.60.2.001 Torrent
04-01-2017, 17:49 PM,
Post: #21
Mizta Insane Offline
Donator
******
Donators 		Posts: 174
Threads: 31
Threads: 31
Thanks Received: 25 in 19 posts
Thanks Given: 122
Joined: Jun 2016
Reputation: 6
RE: Rheingold 4.03.13 Standalone / SDP 4.02.31 / ISTA-P 3.60.2.001 Torrent
Thanks Kestum, will try it out.

(04-01-2017, 15:29 PM)kestum Wrote:  
(03-01-2017, 14:21 PM)Mizta Insane Wrote:  I'm unable to find the "lightning" option under Vehicle Management > Service Function > Body.
[Image: 7f92745e90cddda610d75ff7c453b9ef.jpg]
Quote this message in a reply
05-01-2017, 11:17 AM,
Post: #22
smg_fan
Unregistered
 		 
RE: Rheingold 4.03.13 Standalone / SDP 4.02.31 / ISTA-P 3.60.2.001 Torrent
Hi all,

when I try to connect the ista-P via ENET with BMW F20, i get error 94201 and 55054 and 63014 (CASTOR) see screenshot below. I tested it with some different F21 - all the same on any car.
In the FAQ is listed: Update ICOM Firmware - but I don't use an ICOM.
I searched around in forums and find some hints:
Release battery for 20 min, Reset ZGW, switch off firewall,
Did all - but no changes.

I use the rheingold / ista links from this thread.
Ediabas 7.3.0 (was already installed before)
ISTA-P Loader 6.1F rev1
INPA, ISTA-D, Esys is working fine with the F21.

Any sugestions or hints where to search the bug?
Thanks and regards.
   
Quote this message in a reply
05-01-2017, 22:02 PM,
Post: #23
Almaretto Offline
VIP Donator
******
VIP Donators 		Posts: 1,935
Threads: 40
Threads: 40
Thanks Received: 1,381 in 582 posts
Thanks Given: 598
Joined: Jun 2016
Reputation: 352
RE: Rheingold 4.03.13 Standalone / SDP 4.02.31 / ISTA-P 3.60.2.001 Torrent
(05-01-2017, 11:17 AM)smg_fan Wrote:  Hi all,

when I try to connect the ista-P via ENET with BMW F20, i get error 94201 and 55054 and 63014 (CASTOR) see screenshot below. I tested it with some different F21 - all the same on any car.
In the FAQ is listed: Update ICOM Firmware - but I don't use an ICOM.
I searched around in forums and find some hints:
Release battery for 20 min, Reset ZGW, switch off firewall,
Did all - but no changes.

I use the rheingold / ista links from this thread.
Ediabas 7.3.0 (was already installed before)
ISTA-P Loader 6.1F rev1
INPA, ISTA-D, Esys is working fine with the F21.

Any sugestions or hints where to search the bug?
Thanks and regards.

Did you configure connection and are you using loader?

Quote this message in a reply
06-01-2017, 11:08 AM,
Post: #24
smg_fan
Unregistered
 		 
RE: Rheingold 4.03.13 Standalone / SDP 4.02.31 / ISTA-P 3.60.2.001 Torrent
(05-01-2017, 22:02 PM)Almaretto Wrote:  
(05-01-2017, 11:17 AM)smg_fan Wrote:  Hi all,

when I try to connect the ista-P via ENET with BMW F20, i get error 94201 and 55054 and 63014 (CASTOR) see screenshot below. I tested it with some different F21 - all the same on any car.
In the FAQ is listed: Update ICOM Firmware - but I don't use an ICOM.
I searched around in forums and find some hints:
Release battery for 20 min, Reset ZGW, switch off firewall,
Did all - but no changes.

I use the rheingold / ista links from this thread.
Ediabas 7.3.0 (was already installed before)
ISTA-P Loader 6.1F rev1
INPA, ISTA-D, Esys is working fine with the F21.

Any sugestions or hints where to search the bug?
Thanks and regards.

Did you configure connection and are you using loader?

Yes, connection is configured, and I use ISTA-P loader 6.1F rev1 as mentioned above.
ISTA-P starts, read the VIN correctly and The Series (F21) so communication with the car is working. After read out of VIN it stops with the Error Message.
Quote this message in a reply
07-01-2017, 00:11 AM,
Post: #25
bimmer71 Offline
Donator
******
Donators 		Posts: 347
Threads: 0
Threads: 0
Thanks Received: 73 in 62 posts
Thanks Given: 123
Joined: May 2015
Reputation: 17
RE: Rheingold 4.03.13 Standalone / SDP 4.02.31 / ISTA-P 3.60.2.001 Torrent
Does ista d programming work in this version , or what do I need to edit in cgf file of ista.exe.cfg ?

had problem with last 2 updates, last very got to work was 4.01.22

by , pointing ista to istap folder
Quote this message in a reply
07-01-2017, 08:47 AM,
Post: #26
Almaretto Offline
VIP Donator
******
VIP Donators 		Posts: 1,935
Threads: 40
Threads: 40
Thanks Received: 1,381 in 582 posts
Thanks Given: 598
Joined: Jun 2016
Reputation: 352
RE: Rheingold 4.03.13 Standalone / SDP 4.02.31 / ISTA-P 3.60.2.001 Torrent
(06-01-2017, 11:08 AM)smg_fan Wrote:  
(05-01-2017, 22:02 PM)Almaretto Wrote:  
(05-01-2017, 11:17 AM)smg_fan Wrote:  Hi all,

when I try to connect the ista-P via ENET with BMW F20, i get error 94201 and 55054 and 63014 (CASTOR) see screenshot below. I tested it with some different F21 - all the same on any car.
In the FAQ is listed: Update ICOM Firmware - but I don't use an ICOM.
I searched around in forums and find some hints:
Release battery for 20 min, Reset ZGW, switch off firewall,
Did all - but no changes.

I use the rheingold / ista links from this thread.
Ediabas 7.3.0 (was already installed before)
ISTA-P Loader 6.1F rev1
INPA, ISTA-D, Esys is working fine with the F21.

Any sugestions or hints where to search the bug?
Thanks and regards.

Did you configure connection and are you using loader?

Yes, connection is configured, and I use ISTA-P loader 6.1F rev1 as mentioned above.
ISTA-P starts, read the VIN correctly and The Series (F21) so communication with the car is working. After read out of VIN it stops with the Error Message.

My guess would be that you are missing prerequisite software.

Quote this message in a reply
08-01-2017, 18:52 PM, (This post was last modified: 08-01-2017, 19:12 PM by bmwlover.)
Post: #27
bmwlover Offline
Member
Members 		Posts: 517
Threads: 168
Threads: 168
Thanks Received: 19 in 16 posts
Thanks Given: 159
Joined: Nov 2016
Reputation: 1
RE: Rheingold 4.03.13 Standalone / SDP 4.02.31 / ISTA-P 3.60.2.001 Torrent
Hello. Can ebet program f series with ista p? I have that errors:
94201 technical service initialization failed
-2
55054
10007 (cip)-fault during initialization of ediabas.
Ista d works fine.
Antivirus is disabled.
Quote this message in a reply
08-01-2017, 21:30 PM,
Post: #28
Almaretto Offline
VIP Donator
******
VIP Donators 		Posts: 1,935
Threads: 40
Threads: 40
Thanks Received: 1,381 in 582 posts
Thanks Given: 598
Joined: Jun 2016
Reputation: 352
RE: Rheingold 4.03.13 Standalone / SDP 4.02.31 / ISTA-P 3.60.2.001 Torrent
(08-01-2017, 18:52 PM)bmwlover Wrote:  Hello. Can ebet program f series with ista p? I have that errors:
94201 technical service initialization failed
-2
55054
10007 (cip)-fault during initialization of ediabas.
Ista d works fine.
Antivirus is disabled.

Did you install patched EDIABAS?

Quote this message in a reply
08-01-2017, 21:56 PM,
Post: #29
bmwlover Offline
Member
Members 		Posts: 517
Threads: 168
Threads: 168
Thanks Received: 19 in 16 posts
Thanks Given: 159
Joined: Nov 2016
Reputation: 1
RE: Rheingold 4.03.13 Standalone / SDP 4.02.31 / ISTA-P 3.60.2.001 Torrent
(08-01-2017, 21:30 PM)Almaretto Wrote:  
(08-01-2017, 18:52 PM)bmwlover Wrote:  Hello. Can ebet program f series with ista p? I have that errors:
94201 technical service initialization failed
-2
55054
10007 (cip)-fault during initialization of ediabas.
Ista d works fine.
Antivirus is disabled.

Did you install patched EDIABAS?
Yes, installed.
The problem was fixed by changing name from usb to eth0
Quote this message in a reply
09-01-2017, 01:34 AM,
Post: #30
Loliceman Offline
VIP Donator
******
VIP Donators 		Posts: 385
Threads: 36
Threads: 36
Thanks Received: 834 in 162 posts
Thanks Given: 489
Joined: Sep 2015
Reputation: 213
RE: Rheingold 4.03.13 Standalone / SDP 4.02.31 / ISTA-P 3.60.2.001 Torrent
Dont use your ENET for multi ECU programming please, invest in a ICOM. You can thank me later
Please, Press the Buttons [Image: postbit_thx.gif] and [Image: postbit_reputation.gif] if you feel that this post helped you!
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,713 671,367 1 hour ago
Last Post: Sedoy
XZBMW ISTA+ 4.47.1x Install Files - MEGA shawnsheridan 24 2,545 Yesterday, 17:51 PM
Last Post: vld
  ista + 4.47 install simplextibi 1 347 Yesterday, 12:22 PM
Last Post: slackers
  ista 4.46 Standalone kiranabc 95 11,611 28-04-2024, 16:43 PM
Last Post: palapas1974
  All BMW Maps in one place [Torrent] PsevDo 120 29,923 28-04-2024, 05:57 AM
Last Post: PsevDo
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 98 12,049 27-04-2024, 09:48 AM
Last Post: egyclick
  ISTA 4.47 test plan not available on M3 bmwm3power 3 179 26-04-2024, 20:15 PM
Last Post: 2013m5
XZBMW ISTA 4.47.1x I-LEVEL+OVERVIEW AutoExe3219 0 312 24-04-2024, 22:52 PM
Last Post: AutoExe3219
XZBMW [MEGA] ISTA 4.32 // ISTA-P 3.72 + ALL LOADER up to 6.6 // no license needed hashtagmaster 61 18,521 21-04-2024, 22:17 PM
Last Post: grizzle
XZBMW ISTA SQLiteDBs PL Polish 4.40.12 - 4.40.40 maksymw 3 1,001 21-04-2024, 12:02 PM
Last Post: matigdy

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content