Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
VW T5 - retrofitted camera module
16-12-2016, 09:01 AM,
Post: #1
|
|||
|
|||
VW T5 - retrofitted camera module
I have installed RNS 510 + camera module + rear camera(4pins).
I have made wires by my own - only connectors are original. Problem is: when I put reverse gear - image shows on 5 secound then disapear and shows message "camera not available". After eresing errors from 6C image shows on 5 sec. 01-Engine -- Status: OK 0000 03-ABS Brakes -- Status: OK 0000 04-Steering Angle -- Status: OK 0000 08-Auto HVAC -- Status: OK 0000 09-Cent. Elect. -- Status: OK 0000 15-Airbags -- Status: OK 0000 17-Instruments -- Status: OK 0000 18-Aux. Heat -- Status: OK 0000 19-CAN Gateway -- Status: OK 0000 25-Immobilizer -- Status: OK 0000 37-Navigation -- Status: Malfunction 0010 56-Radio -- Status: Malfunction 0010 69-Trailer -- Status: OK 0000 6C-Back-up Cam. -- Status: Malfunction 0010 ------------------------------------------------------------------------------- Address 17: Instruments (J285) Labels: 5K0-920-xxx-17.clb Part No SW: 7E0 920 860 J HW: 7E0 920 860 J Component: KOMBI H04 0709 Serial number: 00000000000000 Coding: 160201 Shop #: WSC 02756 790 50316 ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04723 ROD: EV_Kombi_UDS_VDD_RM09_SE36.rod VCID: 2F88F0337E12D46A6CE45E-807A No fault code found. ------------------------------------------------------------------------------- Address 56: Radio (J0506) Labels: 1T0-035-680.clb Part No SW: 1T0 035 680 H HW: 1T0 035 680 A Component: RNS-MID H70 4120 Revision: AB001001 Serial number: VWZ6Z7H5061043 Coding: 08010400040000900014 Shop #: WSC 01357 011 00200 VCID: 3380FC43923AF88A083C62-8066 Subsystem 1 - Part No: 1T0 919 859 B Component: EU West V12 8195 1 Fault Found: 00856 - Radio Antenna 011 - Open Circuit Freeze Frame: Fault Status: 01101011 Fault Priority: 5 Fault Frequency: 5 Reset counter: 233 Mileage: 34920 km Time Indication: 0 ------------------------------------------------------------------------------- Address 6C: Back-up Cam. Labels: 5N0-907-441.clb Part No SW: 7E0 907 441 HW: 7E0 907 441 Component: J772__Rearview 0040 Revision: 00H08000 Serial number: 525PA8-J080091 Coding: 0010015 Shop #: WSC 43177 000 104857 VCID: 6524521B6C6E963A56C80C-8030 3 Faults Found: 03006 - Back-up Camera System not calibrated 000 - - Freeze Frame: Fault Status: 01100000 Fault Priority: 2 Fault Frequency: 1 Reset counter: 233 Time Indication: 0 01317 - Control Module in Instrument Cluster (J285) 013 - Check DTC Memory Freeze Frame: Fault Status: 01101101 Fault Priority: 6 Fault Frequency: 1 Reset counter: 233 Mileage: 34927 km Time Indication: 0 Date: 2015.07.16 Time: 09:34:19 Freeze Frame: Term 15 On Reverse OFF Count: 3 02283 - Video Connection to Output [End Unit] 011 - Open Circuit Freeze Frame: Fault Status: 01101011 Fault Priority: 3 Fault Frequency: 1 Reset counter: 233 Mileage: 34927 km Time Indication: 0 Date: 2015.07.16 Time: 09:34:59 Freeze Frame: Term 15 On Reverse ON Count: 4 |
|||
10-01-2017, 21:57 PM,
Post: #2
|
|||
|
|||
RE: VW T5 - retrofitted camera module
Hey number7,
you will have to calibrate your camera as well. Normally you use a floor target for this. Check the link, here is the procedure explanation. http://wiki.ross-tech.com/wiki/index.php...Procedures Cheers, Jurii |
|||
15-04-2017, 14:00 PM,
Post: #3
|
|||
|
|||
RE: VW T5 - retrofitted camera module
I can't calibrate camera when error is...
"02283 - Video Connection to Output [End Unit] 011 - Open Circuit" Video shows on 5 sec then disapeer, black screen. View is on red color or violet - not full color... |
|||
18-04-2017, 09:26 AM,
Post: #4
|
|||
|
|||
RE: VW T5 - retrofitted camera module
Check wiring, maybe there is no wire, video should have 3 wires plus earth.
|
|||
18-04-2017, 19:21 PM,
(This post was last modified: 18-04-2017, 19:22 PM by fatfash.)
Post: #5
|
|||
|
|||
RE: VW T5 - retrofitted camera module
I think it has to do with your wiring as i retrofitted same on my tiguan about 2 yrs ago which is still working till date without issues. As for the calibration, i read it somewhere online but i didn't calibrate,just install and working. Did you code your car to know that you have reverse camera installed
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content